How to Measure Trailer Equalizers to Determine Replacements  

You will have to do some measuring. Take a look at our Double-Eye Trailer Suspension article (see link). I have also linked a picture of a shackle link showing where to measure. Measurements for replacement 1) Measure current shackle from center of…

What you are describing sounds like normal play occurring in your suspension system. When taking turns, it is normal for the suspension to want to bind and cause some play in the suspension system. The design of the Dexter E-Z Flex #K71-652-00 allows…

As long as the leaf springs on your 2021 Coachmen 192RBS are underneath the axle and not on top, then the SumoSprings Trailer Helper Springs #TSS-106-40 you were looking at will fit perfectly. The springs themselves measure right at 4" so you…

You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers #K71-654-00 (5-5/8") and 8,000lb Equalizers #K71-655-00…

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #K71-359-00 will not change the height of your 1997 Dutchman RV because its equalizers and shackle straps should have the same (or very close)…

You can find the Dexter Heavy-Duty Tandem Axle Suspension Kit for 1-3/4" Wide Double Eye Springs listed as part #K71-359-00 on our site.

As long as your current equalizers and shackle straps match the dimensions of what comes in the Dexter Heavy-Duty Suspension Kit #K71-359-00 then you should be good to go. The equalizers measure 5-3/4" long from center-hole to center-hole and…

To determine if the Dexter Heavy-Duty Suspension Kit #K71-359-00 will work with the current suspension on your 2003 Carson trailer you will simply need to measure your equalizers and shackle straps that you have on them right now. The equalizers that…

The Dexter Axle Heavy-Duty Suspension Kit for Tandem Axle Trailers - 1-3/4" Double Eye Springs #K71-359-00 will work for your application. The 2 inch height difference in the equalizer will obviously lower that location slightly which will bring…

The instructions for the SumoSprings kit part #TSS-106-40 do not specify whether they should install in front of or behind the rear axle but I would recommend in front of the axle since most shock is going to be first on the front portion of the axle…

You'd want to install the SumoSprings Trailer Helper Springs #TSS-106-40 on the front side of your axle.

I do have an upgrade option for your 6-1/16" long, 4" tall Equalizer #TREQ310, and since you don't want to lower the ride height with the E-Z Flex #K71-652-00, I recommend going with an option from MORryde, as the Equa-Flex are just too…