Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
900-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling required for installation
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling required for installation
Product also fits Motor Home models
More Information >Vehicle Suspension Specs:
Features:
5,600-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
Drilling required for installation
For vehicles with 4 to 7 inches of clearance between frame and leaf spring
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
Tech Tip:
Product intended for vehicles with single blade leaf spring.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling required for installation
Product designed for vehicles with multi-leaf springs only
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Get better control and a more comfortable ride when off-roading with these helper springs for your front suspension. The tall microcellular urethane springs absorb big bumps and shocks and engage sooner than standard springs.
Installation Notes:
No drilling required for installation
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
5,600-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
Welding and drilling required
For vehicles with 4 to 7 inches of clearance between frame and leaf spring
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling required for installation
Product designed for vehicles with multi-leaf springs only
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
1,900-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…
view full answer...Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…
view full answer...If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…
view full answer...Based on your measurements it matches our Fulton 50-Degree A-Frame Coupler #FE443050303 which looks to be the same as what is on the 2024 Intech Sol Horizon from the videos I could find. So this would use either the EZ Latch #DM14793-81 or…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…
view full answer...Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…
view full answer...Filter Products (10)
Contact and Help
What our customers are saying:
The phone operator was very helpful and made my purchase easy. I will keep this website handy.
Harold
Gillsville, GA