Trailer and Gooseneck Hitch Balls

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Demco Air Force One Flat Tow Brake System #DM54YV is the kit specifically designed for 2019 and Newer Spartan K2 400 RVs which come prepped with the Safe Haul from the factory.

Hey Lucas, The Curt MV #C17050 is for total tongue weights between 500 lbs and 600 lbs only (600 lbs isn't actually the minimum), and for a 5,000 lb GVWR camper, the tongue weight is definitely going to exceed what this hitch is capable of. Your…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

Hey Jason, thanks for reaching out! Yes, the Brophy Ball Mount for 2" Hitch #BH20 will work with the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball #C29FR perfectly!

Yes, we do! The best one is going to be the No-Drill Mount for Electrical Mounting Bracket item #18140. This bracket will wrap around any hitch, square, round, OEM, or aftermarket and provide you with a mounting point that does not require drilling.…

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

Yes. The Curt Class II Trailer Hitch Receiver with Drawbar, #12490, will fit your 2010 Scion xB. This hitch comes with a drawbar, hitch pin and clip. There is no drilling required with this simple bolt on installation. I have included links to the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76290 for your 2022 Honda Passport is confirmed by Draw-Tite to fit all models including your TrailSport. The rear fascia and undercarriage of your TrailSport look identical to the chassis on the 2021…