Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
Item # DM9523010-54
Our Price: $221.11
Confirmed to Fit
2010 Honda CR-V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
2010 Honda CR-V - Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Demco
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your Honda CR-V tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.
Features:
- Diodes display your RV's brake and turn signasl lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along the same wire
- Prevents feedback that can damage your vehicle's electrical components
- Resists corrosion with heat-sealed casing
- 7-Wire to 6-wire adapter cable lets you easily run power from your motorhome to your towed vehicle
- Coiled to prevent dragging and tangling
- Resistant to water, oil, and chemicals, with vinyl coating and silicone-injected plugs to prevent corrosion
- 6-Way socket hardwires to towed car and mounts on the front bumper
- Kit includes:
- 4 Diodes
- 4-Wire harness
- 7-Way to 6-way adapter cord
- 6-Way socket
- Wire connectors
- Cable ties
- 1 Ring terminal
- Made in the USA
Specs:
- Wiring harness length: 26'
- Wire gauge: 16
- Adapter cord extended length: 7'
- 1-Year warranty
Separate vs. Combined Lighting Systems
This kit will display on your towed car as a combined lighting system - also known as a 2-wire system. A combined lighting system uses the same light bulb to signal both braking and turning (in other words, the car signals a turn by flashing the brake light, while a separate/3-wire system light up independently of each other. Add a wiring converter (118158 - sold separately) and 2 additional diodes to get a separate lighting system.
Do I Need a Brake Light Relay?
Because your vehicle has a combined lighting system - wherein the brake signals and the turn signals are carried on a single wire - a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
9523010 Demco Tail Light Wiring Kit
9523054 Demco Trailer Connector Adapter - 7-Way to 6-Way - 7' Cord
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not fit
Customer Reviews
Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord - DM9523010-54
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.by: Nicholas07/11/2023
etrailer was extremely helpful in getting me parts to flat tow our 2023 Jeep Wagoneer. More specifically, Noah took the time to research the required parts, offer technical guidance, and follow up to ensure I was taken care of. Top notch service which was much appreciated.
by: Paul 03/20/2023
2023 Jeep Wrangler Unlimited
Needed new wiring and diodes for my 2023 Jeep Rubicon. ETrailer makes it so easy to set up all the wiring for flat towing.
by: Louis02/28/2022
Jeep Wrangler
This kit was fairly easy to install on a 2021 Jeep Wrangler. If you use this kit to set up a Roadmaster Nighthawk tow bar you do not need the 7-wire to 6-wire coil connector as the tow bar comes with it. Get a 4 diode wire kit without the coil connector and save money.
by: Todd 11/17/2021
Works great, to charge battery of toad you need to change the 12v power from center to match the towed vehicle or wire up towed car to center post 12v
by: John 10/19/2022
Took time to do the wiring, but once done it works great!
by: James 07/17/2020
EASY install and quick service
by: Tom 08/14/2022
2017 Cadillac Escalade
Great products and quick delivery.
by: Harry02/17/2022
Harry
2/19/2023
Great
by: John09/29/2021
Jeep Cherokee
The salesman was very helpful picking the correct setup for my Cherokee, easy to install, looks and works great
by: Joseph 11/09/2021
Works as advertised , however I feel the braking is more abrupt than gradual ..
by: Gerald 01/11/2022
Works great 1 year and still working pe rfectly
by: Customer F01/18/2022
Works great, no issues
by: Albert02/02/2024
by: Jeffrey02/20/2022
Good quality.
by: Meg 08/24/2021
Exactly what I needed
by: Robert 05/10/2021
Work out excellent
by: Ken 06/22/2023
by: Tom09/08/2021
The parts came quickly and they were exactly as described
by: James 04/17/2024
by: Mark 03/25/2024
by: Gary11/18/2023
by: Richard03/04/2023
by: Rob 04/25/2024
2020 Jeep Gladiator
by: Ronald 09/23/2022
by: Bill06/26/2020
excellent service
25
55
Show More Reviews
See what our Experts say about this Demco Tow Bar Wiring
- How To Prevent Battery Drain on 2008 Jeep Liberty While Flat-TowedIn regards to flat-towing a 2008 Jeep Liberty, the battery must be disconnected to prevent drain per the owner's manual. In order to do this, I recommend using the Roadmaster Battery Disconnect part # RM-766 since it allows for this to be done with the flick of a switch, no tools needed and you can do it from inside the cab. Please note, there are specific steps you'll need to follow for setting up the vehicle to be flat-towed, you can find these starting on page 378 of the owner's manual....
view full answer... - Where to Find Price of Demco Flat Towing ProductsThe 9519336 is the same as the # DM9519336 and the 9599006 is the same as the # SM99251. The price for these and all of our products can be found on the product page. We do not carry the 9523157. If you want custom wiring you can use the Curt # C96JR or if you want to stick with Demco you can use the universal # DM9523010-54.
view full answer... - Recommended Flat Towing Wiring Harness for a 2023 Ford F-150 w/ LED Lights No, it will not. Since your 2023 Ford F-150 has LED tail lights you will need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item # RM38FR. The issue is that the brake and running lights will all be the same brightness with the standard diodes included in the Demco item # DM9523010-54. The diodes in the Roadmaster item # RM38FR kit convert the 12V signal from your RV's wiring to a 9V signal which allows the differentiating brightness needed between...
view full answer... - Roadmaster Crossbar-Style Vs. Direct-Connect Base Plate Kits for 2021 Jeep Wrangler UnlimitedThe biggest difference between the Roadmaster Crossbar-Style Base Plate Kit # RM-521453-4 and the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 for your 2021 Jeep Wrangler Unlimited is going to be the style of tow bar that you can use. The Crossbar-Style Base Plate Kit # RM-521453-4 will allow you to use a tow bar like the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR. The Direct-Connect Base Plate Kit # RM-521453-5 will allow you to use a tow...
view full answer... - Replacement Demco Coiled 7-Way To 6-Way Diode Wiring Kit Cable If you're just wanting the 7-wire to 6-wire cable from the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 then you'll want part # DM9523054. This will also include another 6-way socket, which you can hang onto as a backup if you ever have an issue with your current one.
view full answer... - Recommended Flat Towing Components For A 2024 Chevy Trax Hi John, Yes, we do have everything you'll need to flat tow your 2024 Chevy Trax. Baseplate: Blue Ox Base Plate Kit # BLU24UR. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables included and has an adjustable head to help keep the tow bar level between the motorhome and Trax. Tow Bar Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord # DM9523010-54. This diode kit will transfer...
view full answer... - Recommended Flat Towing Set Up for a 2024 Buick Encore GX Yes, it will. The Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System item # RM-766 is not only compatible with your 2024 Buick Encore GX but it is recommended to be used by Roadmaster. This a great part that makes disconnecting and reconnecting your battery extremely simple. Here are some other parts you will need to flat tow your 2024 Buick Encore GX: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar 2" Hitch - 6,500 lbs item # BX7380 Base...
view full answer... - Parts Needed to Flat Tow 2021 Ford F-250 Super DutyThat is good that you already have the base plates and tow-bar for your 2021 Ford F-250 Super Duty, and the needed supplemental braking. That just leaves a few items such as the the wiring kit, I suggest the Demco 4-Diode Universal Towed Vehicle Wiring Kit, # DM9523010-54. For your supplemental braking, if you have the Demco SBS Air Force One Supplemental Braking System for Motor Homes with Air Brakes, # SM99243, then you all you need is the Second Vehicle Kit, # SM99209. If you've...
view full answer... - Can a 2016 Ford Explorer 4WD With V6 Be Flat-TowedYes, a 2016 Ford Explorer (4WD) can be flat-towed with all four wheels down so long as it has the 3.5L V6 or 3.5L EcoBoost V6 Engine. That said, there are no modification needed for this unless a specific flat-tow part you are looking at requires this. I have attached some parts for you below as well that you will need. Demco Tabless Base Plate Kit part # DM9519329 (Clean Look) Demco Dominator Non-Binding Tow Bar part # DM9511008 (Easiest To Use) Demco 4-Diode Universal Towed Vehicle Wiring...
view full answer... - Is the Demco 4-Diode Universal Towed Vehicle Wiring Kit Offered Without 7 to 6-Way CordYes, the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector part # DM9523010-54 is available without the umbilical cord using the Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010. If you need the 6-pole as well you can get this with part # PK11609.
view full answer... - Best Parts to Flat Tow 2021 Kia Soul With Manual TransmissionThere are a number of parts you will need in order to flat tow your 2021 Kia Soul with a manual transmission, and I'll be happy to recommend the best parts that are the easiest to use for you. The best parts for you are the following: - Base Plate Kit: Blue Ox Base Plate Kit # BX2727 - Tow Bar: Blue Ox Alpha 2 Tow Bar # BX7380 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play...
view full answer... - Correct Tow Bar Wiring For 2022 Jeep Gladiator With LED Lights & ParkSenseSo a couple things here, as by blind spot indicators I believe you are referring to the ParkSense feature on your 2022 Jeep Gladiator. If so, you would not be able to use the Demco # DM9523010-54. The issue is that the brake and running lights will all be the same brightness with standard diodes. To avoid this, you'll need a Smart Diode kit from Roadmaster: - Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights # RM63MR The diodes in this kit convert...
view full answer... - Can I Flat Tow a 2021 Jeep Wrangler with a Smittybilt SRC Front bumper?The Smittybilt SRC Front bumper on the 2021 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars Item # RM-035 to tow with the D-rings on your bumper. To flat tow your 2021 Jeep Wrangler you will also need, a tow bar, safety cables, supplemental braking system, wiring and possibly a high low adapter. Tow Bar- Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar item # RM-422 Safety Cables- RoadMaster...
view full answer... - Flat Towing Wiring For A 2017 Kia SoulMy recommendation is to use a 4-diode universal towed vehicle wiring kit like # DM9523010-54. What this does is easily allows you to connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system wires towed car as a combined lighting system so that brake and turn signals travel along the same wire. This kit also includes a 6 way to 7 way coiled cord that will connect to your motorhome and your Kia Soul as well as, all the necessary hardware to install. You...
view full answer... - Demco Universal Towed Vehicle Wiring Kit for 2021 Jeep WranglerI would be happy to help make a wiring recommendation for your 2021 Jeep Wrangler. I recommend the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector item # DM9523010-54. This complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. The diodes prevent electrical feedback and the damage it can cause to your car's electrical components.
view full answer... - Can You Order Just 7-way to 6-way Cord From Demco Diode Kit DM9523010-54?Yes we sell just the 7-way to 6-way cord included in the Demco # DM9523010-54 you were looking at without getting the diodes. You'll need # DM9523054, though it will come with a new 6-way plug that you can keep as a spare. There's no way to order it without that plug as well.
view full answer... - Best Base Plate For 2021 Jeep Cherokee Trailhawk We can definitely help you out with the best base plate for your 2021 Jeep Cherokee Trailhawk. The best option, due to the fact it will give your Cherokee the cleanest look when you aren't flat towing and is a bolt-on installation that doesn't require any drilling, is the following: - etrailer Invisible Base Plate Kit # e98951 This will fit your '21 Cherokee Trailhawk and give you a start to your flat towing set up. Along with the tow bar you'll also need other parts, including a compatible...
view full answer... - Parts Needed to Flat Tow a 2021 Jeep CherokeeFor your 2021 Jeep Cherokee you will at minimum need base plates, a tow bar, safety cables, a wiring solution to display your indicator lights from the RV to the Jeep, and a braking solution/supplemental braking for the Jeep. I recommend the Demco Tabless Base Plate Kit, # DM9519307 that will match perfectly with the Demco Dominator Non-Binding Tow Bar, # DM9511008 you have been looking at. This also includes the needed safety cables. For the wiring, I suggest the Demco 4-Diode Universal...
view full answer... - Demco Base Plate And Tow Bars For Flat Towing a 2021 Chevrolet TahoeThe Demco Tabless Base Plate Kit # DM9519342 is the base plate that will fit your 2021 Chevrolet Tahoe. I recommend using the Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 to connect your Tahoe to the tow vehicle. You will need the Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 to allow your Tahoe tail lights to function so that you do not have to use magnetic lights that tend to easily get damaged. A Roadmaster Automatic Battery Disconnect # RM-766 will allow...
view full answer... - Recommended Tow Dolly For A 2010 Ford Ranger The online manual for a 2010 Ford Ranger doesn't list anything about dolly towing the vehicle but does state that manual transmissions can be placed in 2WD and flat towed, so you're more than likely fine to dolly tow your Ranger, but I recommend double-checking with your local Ford dealership to ensure there isn't anything else that would prevent you from doing so. If you haven't purchased your tow dolly yet then I recommend the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes # DM9713093....
view full answer... - 2018 Chevrolet Equinox Flat Tow Wiring NeedsThe Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 is going to allow you to run your vehicles existing 4 pole harness to the front to connect to your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. If you already have the wiring you need the Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round # A10-6034VP and the Hopkins Heavy-Duty, Coiled Trailer Connector Adapter - 7-Way to 6-Pole Round...
view full answer... - Complete Flat Towing Setup for a 2015 Kia SoulI would be happy to help you find those parts so you can flat tow your 2015 Kia Soul. For a manual transmission you will need a baseplate, tow bar with safety chains, supplemental braking system, wiring harness, and a battery charge line. I have attached numerous installation videos to help guide you through installing these parts. Tow Bar: For a tow bar, I recommend the Blue Ox Alpha Tow Bar item # BX7380 which comes with the safety cables you need. You should also add the Blue Ox Base-Plate...
view full answer... - Procedure and Equipment Needed to Flat Tow 2015 Ford Edge SEL Behind MotorhomeAccording to what I've read in the owner's manual, your Edge can indeed be flat towed if the specific procedures listed in the manual are followed precisely. To flat tow your Edge, hook up to the motorhome then press and hold the brake to the floor. Start the vehicle and shift into Neutral with the brake pedal still pressed then turn off the vehicle. On a keyless start equipped vehicle, push the keyless start button one to shut off. If the vehicle has an ignition key, turn the vehicle...
view full answer... - Recommended Flat Towing Equipment For A 2021 Jeep Wrangler Sahara 4XEIf you went with the etrailer Invisible Base Plate Kit - Removable Arms Item # e98948 you would need to also get an adapter so I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM-521453-5 instead. The Blue Ox Patriot Portable Braking System - Proportional Item # BLU37TR will work with your Jeep and I recommend installing the 12 Volt Outlet Kit, 20 amps Item # RM-9332 to have a dedicated 12v outlet to power it. The Demco 4-Diode Universal Towed Vehicle...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Written by:
Kristina F
Video by:
Jacob H
Video by:
Aidan B
Video by:
John S
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
7/17/2021
Works great we use it at least monthly to pull our Jeep gladiator behind the RV no issues at all