Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your Chevrolet Silverado's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.Very good quality
I'm betting you won't post this but here you are: HITCH receiver arrived badly bent due to bad packing, and am unable to install. etrailer is unwilling to replace in time to meet my needs. VERY DISAPPOINTED!!!
I was very happy with the part that came in and the time was fast.
Curt makes good products. Very friendly online purchase experience. I would recommend some foam packaging inside the box as my hitch arrived bent. I was able to bend it back with the help of a large C-clamp so the holes lined up. Although the box looked good I suspect it was dropped and that may have caused the bend.
I own hotrod,and looks mean a lot to me.This hitch is beautiful.Gloss black power coated,and built strong.I am sure this hitch will hold more than the rating.I will be putting it on soon.
Well since a year has no problems at all. But during the install , when the hitch was delivered the box was torn and trying to install the hitch one side was slightly bent. No big deal by using a pry bar and some muscle it worked - again I like the hitch and I've purchased other products from etrailer and will do again thank you
Spend a little extra and get the Curt !! The one that hide’s all framework…you will be glad you did…!
I purchased this for my husband for a Christmas gift. I love the price and that it is a brand name. I also love the fast shipping. I managed to get it delivered to me when he was out of town. Would buy stuff this company again.
I had to make adjustments in order to make the trailer hitch fit up. Not a big deal but I had to use a C-clamp to get the two wings aligned for bolt insertion. It was also necessary to use a burr bit to enlarge the two front holes at the hitch point and also one of the holes at the corner. ( one had to be elongated by 3/16" and the other two by 1/8"). I wasn't expecting to have to do this at all.
The quality of the assembly welding and paint was very good but the dimensional problem not.
Worst part about installing this hitch was removing my old one first. The parts fit great and installed it myself fairly quickly. Fits just a little higher then the OEM hitch, but nothing that causes a problem. Looks great too
FIT PERFECTLY, INSTALLED BY MYSELF IN ABOUT 45 MINUTES. USING CHEAP HAND TOOLS
SUPER SIMPLE,LINE X TRUCK WANTED 399 INSTALLLED FOR SAME HITCH. AFTER A YEAR NO PROBLEMS
This hitch fit very well without any hole drilling as advised by product description. I did have to ream out the two cone washers, to fit the existing bumper bolts. Another guy also commented on the cone washers, so this was a heads up for me! Also, those factory bumper bolts on my 2006 chevy 1500 silverado, require a 21 mm socket , which you will need for these two bolts only. Happy so far with this product.
,
the receiver hitch did not fit like they show you in the video. The holes did not all line up and I ended up drilling two holes a little bigger to make it fit but once I did that and we got it in place and the bolts all tightened down it looks great. The video said it should take approximately 40 minutes, it took another person and I 3 hours monkeying with it before we got it in place.
this is the second curt hitch i have installed and installation time is less than 1/2 hr and neither required any alterations will highly recommend. truck will be used to tow small horse trailer.
my only problem was it didnt fit quite right , i had to lay on my back and spread it apart with my legs while my son ran the bolts in , and the r/side bolt by hitch tube was a half hole off and could get a bolt in it so now it will have to be welded to the frame where the bolt is missing, so other than it not fitting right it seems sturdy
Every bit as good as advertised! Installation was a breeze and took about 30 minutes alone. The only problem I ran into was the cone washers not fitting over the bolts, but I found some in my stash that would fit. I also painted ther bumper mount bolts black because old people are fussy about looks! Great hitch and I'm very happy with it so far.
Great hitch. Tucks up nice just under the bumper. Extremely well made, nice powder coating. It will look better than my truck once mounted! I've ordered lots from etrailer.com. I can't say enough about them. Great team of folks that know everything. Product videos, technical support, great prices. Holy Toledo, they have it all. Thanks folks, keep it up......
Hitch fit great with no issues installing. If you are looking for a hitch for your 99-06 Silverado/Sierra 1500 that tucks up and behind the bumper, this is it.
Hitch came well secured to shipping box. This is my 2nd order from Etrailer with no issues.
Good product, easy to install. The Etrailer people were easy to deal with. My hitch came on time and was packaged well. I would definitely do business with them again.
I ordered wrong hitch. I contacted etrailer and discuses problem with Ashley. She quickly worked through problem. I sent the first hitch back to etrailer and the next day my new hitch arrived and was installed on my truck. I am very happy with etrailer. I have delt with e trailer many times and have always been satisfied with them. They are a good people and easy to work with. I will recommend etrailer to all my friends.
Delivery was fast.The hitch fit without any drilling and was easy to install. The two bolt that are close to the hitch and bolt to the bumper were too large for the nuts welded into the bumper. I was able to use the bolts form the old hitch. These holes were slightly off and needed some drilling.
Hitch works great and fit with little trouble. My rear bunper was bent that made it a little harder to put on. But the hitch it self was great
Great product, ordering was easy, site gave easy to navigate prompts so finding right one for my truck was easy, arrived in time specified, fit was perfect, was surprised by instructions to remove spare tire,( it wasn't in the way) hardware included was a reason for buying from your company and it was top quality also, would recommend you to everyone
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.