2019 Ford F-450 Cab and Chassis Brake Controller

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

You need item ETBC7L ($119.83) to install your controller.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

You need item ETBC7L ($119.83) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

You need item ETBC7L ($119.83) to install your controller.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

You need item ETBC7L ($119.83) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

A lot of controllers have come and gone over the years, but the P3 remains one of the most reliable. It might not have a ton of new-fangled features, but it always gets the job done. And we love how easy it is to customize, adjust, and save settings.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

A lot of controllers have come and gone over the years, but the P3 remains one of the most reliable. It might not have a ton of new-fangled features, but it always gets the job done. And we love how easy it is to customize, adjust, and save settings.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

A lot of controllers have come and gone over the years, but the P3 remains one of the most reliable. It might not have a ton of new-fangled features, but it always gets the job done. And we love how easy it is to customize, adjust, and save settings.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

This unique brake controller mounts on your trailer instead of in your truck cab. You won't be knocking your knee against it, and you can tow your trailer using any truck. The handy key fob gives you remote control of your braking.

Installation Notes:

You need item ETBC7L ($119.83) to install your controller.

Features:

This unique brake controller mounts on your trailer instead of in your truck cab. You won't be knocking your knee against it, and you can tow your trailer using any truck. The handy key fob gives you remote control of your braking.

Installation Notes:

Features:

This unique brake controller mounts on your trailer instead of in your truck cab. You won't be knocking your knee against it, and you can tow your trailer using any truck. The handy key fob gives you remote control of your braking.

Installation Notes:

You need item ETBC7L ($119.83) to install your controller.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Trail's unique user-controlled mode gives you direct control of your braking for any weather or terrain.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Trail's unique user-controlled mode gives you direct control of your braking for any weather or terrain.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Trail's unique user-controlled mode gives you direct control of your braking for any weather or terrain.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.

Make sure vehicle has a brake control port. If it does not, the brake controller will need to be hardwired. In this instance we recommend using part # ETBC7.

Tech Tip:

An additional length of wire may be necessary to connect the 7-Way socket of part 37185 to the vehicle's tow package wires which are along the rear frame rail.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.

Installation Notes:

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.

Installation Notes:

You need item ETBC7 ($117.67) to install your controller.