Pre-Greased Hub Replacement for 8-248 Dexter 3,500 lb Hub with 5 on 5-1/2 Bolt Pattern
Question:
I have a TWF trailer with a dexter hubs 8-248 and 5 on 4 1/2 spacing with 14 inch wheels I want to replace the hubs. Do you have hub assemblies that are greased an ready to install
asked by: Joe P
Expert Reply:
We have exactly what you need to replace your Dexter 8-248 hubs, which use # L68149 for their inner bearing and # L44649 for their outer bearing and fit Dexter 3,500 lb axles.
If you need just the idler hub, we have the Pre-Greased Trailer Idler Hub Assembly - 5 on 4-1/2 # AKIHUB-545-35-EZ-K for EZ-Lube axles, or # AKIHUB-545-35-K for standard axles.
If you need the hub/drum assembly, we have the Pre-Greased Trailer Hub and Drum Assembly - 5 on 4-1/2 # AKHD-545-35-EZ-K for EZ-Lube axles, or # AKHD-545-35-K for standard axles.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Most Popular Wheel Bearings
- Q&A: Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Hub for Dexter 8-248
- Q&A: What is the Outer Diameter of Center of Dexter Trailer Hub Assembly - 3,500-lb Axles - 5 on 4-1/2
- Q&A: What is Maxx Coat on DeeMaxx Disc Brake Kit and Why is There a Mix of That and Stainless Steel
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Inner Member for Tie Down 75LP Brake Actuator
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Maintenance Schedule