Can Quick Level Touch Panel for Lipper Level Up be Reset  

I am sorry Lippert did not include their instructions with your Lippert Trailair Air Ride 5th Wheel Pin Box #LC158778 but I have included a link to them on the Lippert website. I also linked an image of page 3 from those instructions which shows the…

I have a solution for you but the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System item #LC74FR replaces the Quick Level auto-leveling control pad for your Lippert Components Level-Up hydraulic leveling…

Thank you for the feedback! It sounds like you might need to re-calibrate the zero point on your leveling system. If you've got a Lippert Ground Control 3.0 #LC304136 system, I've gone ahead and listed the steps you'll need to follow…

The Replacement Quick Level Touch Panel #LC74FR will work for some hydraulic and electric Lippert leveling systems. Since your remote looks the same as this part it will be what you're needing as a replacement. Attached is a review video for you…

The blank screen on your LCI Ground Control 3.0 could be either a power issue or a control module issue. I recommend first remove the panel and unplug it from the back leaving it unplugged for at least 15 minutes so that it loses all of the residual…

I reached out to my contact at Lippert regarding the issue you're having with the Level-Up Hydraulic System on your trailer/RV. He said the symptoms you described are likely due to a faulty touch pad, but there is one thing he wants you to check…

Yes, the Replacement Auto Level Control Panel for Lippert Ground Control Leveling System part #LC421484 will work on the Lippert Ground Control 3.0 Electric 5th Wheel RV 6-Point Leveling System part #LC675817. It will also work on the Lippert Ground…

Typically when the Quick Level Touch Pad #LC74FR red light flashes it indicates an error and the retract button flashing green it means that the error has been reset. The issue appears to be on the extending, so it's possible that there's…

The blinking red light indicates an error in the system. Most codes can be cleared by pressing "retract all". Hold the button if it is slowly blinking faded red because that is a jack fault. Hold until the jacks begin to retract. If that…

It sounds like you aren't achieving level because the jacks seem to be tied together versus independently. I recommend unplugging the system completely for 15 minutes to let it reboot. You will need to do a zero calibration again, however this…

According to Lippert, the #LC421484 isn't compatible with your Level Up Hydraulic Leveling System. The #LC421484 is compatible with the #LC358590 or #LC675817 Ground Control 3.0 or the Ground Control TT automatic travel trailer leveling system,…

Yes, the autolevel feature can be used to relevel the trailer if needed. The nose of the trailer will need to be above level before you hit autolevel button on your Quick Touch keypad #LC74FR, so you'll want to ensure that you raise the front…