Recommended Blue Ox Base Plate Kit for a 2014 Jeep Grand Cherokee Limited  

Yes. You will need to purchase and install Mopar flat-tow wiring kit 68321424AB before flat towing your vehicle, as per Jeep tech bulletin (08-010-17). This kit is available at your local Chrysler and Jeep dealership. I've attached a photo of the…

The Mopar Flat-Tow Wiring Harnesses are no longer required on newer Jeeps such as a 2020 Jeep Grand Cherokee. I have attached a list of parts that you will need to flat-tow said vehicle below. The battery charge line is not required. etrailer…

In order to flat tow your Jeep Grand Cherokee behind an RV you need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and likely a high-low adapter. Starting with the base plates, I recommend the…

Usually, people want the exact opposite; for it not to blink with either turn signal. The reason that it blinks with just the right turn signal is because the 4-Way connector for a trailer has combined brake and turn signals and only one wire and a…

We do have other options in stock that are confirmed to fit your 2021 Jeep Grand Cherokee. If you are looking for a direct connect style base plate to match to a current Blue Ox manufactured tow bar, we have an available option. I suggest the…

For a complete flat tow kit for your 2019 Jeep Grand Cherokee you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Here is what I recommend: etrailer Invisible…

We do not have any Blue Ox baseplates available for your 2014 Jeep Grand Cherokee. I do recommend The Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521440-5 because it is a sturdier cleaner installation then the Blue Ox setups. The…

Before you consider re-tapping the threads, re-check to make sure you have the right sized Anode Rod. I reached out to my contact at Suburban and they advised me that your water heater has a 3/4" NPT (National Pipe Threading) and it has 12…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…