Customers compare AC-530 to these similar products
Products Featured in this Video
Hey guys, Shay here, with each etrailer.com, and today I have a 2007 StarCraft Homestead Fifth Wheel. And I want to walk through how to install the Stromberg Carlson Folding Handrail. Adding a handrail like this to your camper, or RV, is going to make it a lot easier, if you have mobility issues, with walking up and down the stairs. With the smaller handles it may fold out about this far, makes it… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I think you are referring to a hub or hub/drum assembly that has a 6 on 5-1/2-inch wheel bolt pattern and that has the correct capacity for a 3500-lb axle. Yes, such items exist and we can offer you a choice of four different hubs with this bolt…
view full answer...MORryde does not offer a hand rail for the Flip Tread Steps like the part #MR42UR so you'd need to use a folding hand rail that attaches to the RV like with the Lend-A-Hand part #AM-533.
view full answer...The hand rail with the largest handle would be the Stromberg Carlson #AM-533 you'd looked at. The hand rail also features a padded handle on the lower end of the bar for a comfortable grip when you're climbing that first step. I have no way…
view full answer...The Handrail for Second Generation 4-Step MORryde Steps #MR73AR is designed to be used with the StepAbove steps. Unfortunately this rail will not work for your MORryde Flip Tread RV Steps #MR42UR. That being said, the best solution is to add a…
view full answer...Sounds like you might be looking for the Handrail for Second Generation MORryde StepAbove and StepAbove with Strut Assist Steps - Triple #MR83AR; the difference between the 1st generation and 2nd generation steps are that the 2nd Gen leg adjustment…
view full answer...You will want to look at the legs of your steps to determine which MORryde steps you have. If your MORryde steps have a pull pin then you've got the 1st generation. If you have a button that releases the legs for adjustment, you have the second…
view full answer...The bolts for the Handrail for First Generation 4-Step MORryde Steps #MR33RR will use (4) 1/4" - 20 x 1 1/2” long, grade 5 steel, zinc coated bolts. Additionally, the corresponding washers are also 1/4", and is made of grade 2 steel with a…
view full answer...Yes, the Stromberg Carlson Rail Mate Folding Handrail part #AP-101 will work just fine with the Flexco Manual Folding Triple Steps on your 2016 Forest River Rockwood Mini Lite 2504S. It comes with all of the hardware and brackets you need for…
view full answer...The difference between the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR, and the JT's Strong Arm Jack Stabilizer Kit #LC191023 is while both limit side to side movement of your 30' travel trailer, only the JT will…
view full answer...The shim kit part #5991-SM is designed to push the handle part #AM-533 out a little further from the body of the RV so that it can close around a door that sticks out further from the outer wall. So if your door closes mostly flush with your RV wall…
view full answer...It is possible that the Stromberg-Carlson had rail #AC-530 will fit the stock brackets on your 5th wheel trailer. But this is considered a universal fit item. But if if the rail part does not happen to fit the brackets or the bracket spacing, the…
view full answer...The 2022 Subaru Outback and Outback Wilderness share the same hitch fits. Although the #DT73RR Draw-Tite Class III hitch is a fit for your vehicle, once installed the entire hitch would be visible from the rear. If that doesn't bother you, this…
view full answer...