Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red
Item # RM-152-LED-7
Our Price: $244.51
Confirmed to Fit
2014 Jeep Compass
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (27)
- Q & A (0)
- Photos
2014 Jeep Compass - Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red
- Bulb and Socket Kit
- Bypasses Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your Jeep Compass's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.
Features:
- Tail light kit gives you brake, running and turn signal lights for your towed vehicle without tapping into its wiring
- Bypasses towed car's electrical system completely - wiring is routed beneath the car
- Eliminates concerns of violating the vehicle manufacturer's warranty
- LED lights last longer, burn brighter, and activate faster than incandescent lights
- Red diodes ensure that tail lights show red, not pink
- LEDs generate little heat - no risk of melting lenses
- Independent bulbs and sockets mount inside your tail lights
- Take up less space in tail lights than incandescent bulbs
- Require a 1" hole drilled in tail light housing
- 7-Way to 6-wire coiled adapter cord runs power from your RV to your towed vehicle
- Silicone-injected plugs prevent corrosion
- Electrical cord is resistant to water, oil, and chemicals
- Wiring, 2 bulbs, 2 sockets, zip-ties, vehicle-end connector, and instructions for installation included
- Made in the USA
Specs:
- Adapter cord length: 8' when extended
- 16 Gauge
- Wiring harness length: 27'
- Light output per bulb: 450 lumens
- Overall length of bulb: 2-1/2"
- Length of bulb from flange to top of bulb: 2"
- Wire loom:
- Length: 3'
- Diameter: 1/2"
- 1-Year limited warranty
Note: Each tail light housing on towed car must have enough room for extra bulb and socket.
152-LED Roadmaster Tail Light Wiring Kit for Towed Jeep Compasss - LED Bulb and Socket - Red
1676-7 Roadmaster Coiled-to-Straight 7- to 6-Wire 8' Power Cord
910030-7 RoadMaster 6-Wire Connector Socket with Lid
Installation Details
Alternate Instructions
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red - RM-152-LED-7
Average Customer Rating: 4.5 out of 5 stars (27 Customer Reviews)
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your vehicle's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.by: David A.03/06/2024
Installed in my 2024 Chevy Trax. I ran the wire harness up through the front fender, and along the DS rocker panel. No drilling into body required. However, I purchased extra loom to better protect exposed wires next to body. Additionally, I purchased extra wire to support the DS to PS taillight connections. Finally, be advised the plastic taillight assemply is "double hulled," so once you bore through the exterior of the assembly, you will need to drill again, into the lense. On this point, and to ensure a good fit of the bulb socket, a Dremel tool was used to grind down the plastic surface, to ensure a good flat and tight fit. Finally, I used the first cut-out to fashion a cap and to seal the light socket installation. See pic.
by: Glampur02/15/2023
I am very happy with this kit. It gives you everything you need to setup an independent brake light system for you toad and therefore bypassing the vehicles internal wiring and computers. I went with this setup as I did not want to complicate my wiring or damage the internal systems of the toad. IT takes sometime to install, but once done hooking up and running the system is simple as plugging in your 7way connector. Combine this with a onboard braking system, and you have the perfect system to pull your two vehicle behind your RV.
by: Ken09/03/2021
They do work, but for what they are and the materials included, they are WAYYYY more expensive than they need to be. I’d say $xx max on the LED tail light wiring kit, since it’s just two LED bulbs and sockets and some wire & bits and pieces. I bought them figuring I should rely on Roadmaster expertise on manufacturing something that is better than what I could put together, but now that I’ve installed all the items, I think I could have just bought the parts and assembled them to work better than these items.
by: Gary 07/05/2021
Easy directions and I did it in conjunction with installing the baseplate.
by: William08/23/2021
Installation and function have been without issue.
by: Jerry 12/09/2021
This is an outstanding company. They are truly customer oriented. A special shout out to Lori B who walked me through my order and was great about follow up. This is why E trailer is what it is.
Jerry
by: Warren 09/08/2022
2003 Jeep Wrangler
Helpful staff fast delivery
by: Jeff 07/14/2022
Works great. LED’s are nice and bright.
by: Russell11/04/2021
Excellent and fast service!
by: David06/25/2020
great customer Service I,ll be back
by: Gene 12/26/2021
by: Michael 06/07/2023
by: Daniel 03/05/2024
by: Richard 10/02/2022
by: John 09/15/2022
by: Jim 09/11/2022
2019 Chevrolet Spark
by: Barry 08/27/2022
by: Sue12/01/2022
by: David 08/19/2022
by: Brian 02/18/2021
by: John 08/11/2022
by: John 02/01/2022
by: Kurt 11/16/2022
by: Todd 10/08/2021
by: Frank09/22/2022
25
27
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Can Bulb and Socket Flat Tow Wiring Fit a 1999 Jeep Cherokee SportThe Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED requires a 1" hole to install the bulbs into the tail light housing. It does look like you're limited on spacing inside your housing and when I reached out to my contact at Roadmaster he confirmed that we need to go with a different tail light kit for your setup. I recommend the Universal Hy-Power Diode Wiring Kit # RM-154 if the brake and turn signal are combined on your 1999 Jeep Cherokee Sport, or the Universal Wiring...
view full answer...
- Flat Towing Base Plates for 1995 Volkswagen Golf Mk IIIFor your 1995 Volkswagen Golf MkIII, you'd need the Roadmaster # 1217-2, which is a confirmed fit. Your Golf will be flat towable as long as it has a manual transmission. In addition to the base plates, you'll also need a tow bar like the etrailer # e44ZR which includes the safety cables, a taillight wiring kit like # RM-152-LED-7 and a supplemental braking system like # HM39494.
view full answer... - Parts Needed to Flat Tow 2004 PT Cruiser Behind MotorhomeAccording to Blue Ox, the # BX1956 base plate kit you'd looked at is compatible with turbocharged models of the 2004 Chrysler PT Cruiser. For a tow bar, the Blue Ox Alpha 2, part # BX7380 would be an excellent choice. The tow bar is non binding, so it won't lock up when you're trying to unhook the vehicle from the tow bar. The Alpha 2 is also self centering, which means you won't have to have the vehicle perfectly lined up behind the motorhome in order to hook up. Safety cables are included. To...
view full answer... - Base Plates for 2018 Chevy Equinox for use With Roadmaster Stowmaster 5000 Tow BarYou can use your Roadmaster Stowmaster 5000 tow bar with your 2018 Chevy Equinox, but it is not compatible with the Roadmaster EZ5 Direct-Connect Base Plate Kit # RM-523193-5; the Stowmaster requires a crossbar-style base plate, the Roadmaster EZ4 Crossbar-Style Base Plate Kit # RM-523193-4. If you already have the EZ5 base plates on your 2018 Equinox you'll need a different tow bar, with the most cost-efficient being the Roadmaster Falcon 2 Tow Bar # RM-520. To round out your flat towing...
view full answer... - Does Grille Need to be Trimmed to Mount Base Plate in 2008 Mini Cooper S HardtopWhile it doesn't need to be drilled, the lower front grille of your 2008 Mini Cooper S Hardtop does need to be trimmed in order to install the base plates that fit (unless you have the Sport suspension), which are the following part number: - Roadmaster EZ Base Plate Kit # 521877-1 This is necessary in order to allow the arms to protrude so the tow bar has a place to attach. Along with the base plates, the rest of the flat tow set up for your '08 Mini Cooper S Hardtop consists of the...
view full answer...
- Recommended Base Plate, Tow Bar and Accessories for Flat Towing 2009 Mini Cooper BaseIf your Mini Cooper is the base hardtop, you'll want to use the Blue Ox # BX1304 you'd looked at. For a convertible, use # BX1306. For a non-binding tow bar, I'd recommend the etrailer SD Non-Binding Tow Bar, part # e47ZR which is self aligning. You won't need to have the Mini Cooper perfectly aligned behind the motorhome to hook up. Attach the arms and drive away. The arms will self align as you pull away. The tow bar is fully compatible with the Blue Ox base plates mentioned above and...
view full answer... - Wiring Options for Flat Towing a 2006 Mini CooperWe actually have a decent amount of wiring kits that you can install on your 2006 Mini Cooper to flat tow it. If you plan on flat towing it frequently then installing a tail light wiring kit like the Roadmaster # RM-155 which uses a 4-Way to the motorhome or the Roadmaster # RM-152-LED-7 which uses a 7-Way to your motorhome is what I recommend using. After the initial installation all you'll have to do is plug in the wiring from the front of your Mini Cooper to the back of your motorhome. If...
view full answer... - Recommended Blue Ox Base Plate Kit and Wiring Harness for a 2014 Honda CR-V EX-LYou got it Maryann, the Blue Ox Base Plate Kit # BX88267 you're looking at will work just fine with your 2014 Honda CR-V. For a wiring kit, you're going to want to check out the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector # RM-152-LED-7. Also, If your owner's manual only pull the #19 ACC radio fuse, use part # RM76511, if it states to pull the #19 ACC radio fuse and the #20 ACC key lock fuse, use part # RM76512. Finally the last couple of things you're going to need...
view full answer... - What Parts do I Need to Flat-Tow My 2018 Chevy Equinox? We definitely have the parts and some installer options for you. For the parts, you need a base plate, a tow bar, safety cables, a tow braking system, and vehicle tow wiring. I recommend the following setup: - etrailer Invisible Base Plate Kit - Removable Arms # e98965 - Blue Ox Ascent Non-Binding Tow Bar - Motorhome Mount - 2" Hitch # BX4370 (comes with safety cables) - Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil...
view full answer...
- LED Bulb & Socket Tow Bar Wiring Compatibility With 2020 Ram 2500 When wiring in the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7 you'll want to place the bulbs in the red portion of the tail lights. Without seeing your tail light assembly fully taken apart to know where you'll have enough clearance in the red portion of the lights it's hard to say a specific spot will work. The LED bulb is going to stick into the light assembly 2" so as long as you have that amount of space it should be fine.
view full answer... - Parts Needed to Flat Tow 2020 Chevy SpartAccording to my research, manual transmission equipped models of the 2020 Chevy Spark are indeed capable of being flat towed. Automatic transmission equipped vehicles would need to be dolly towed, using a tow dolly like # RM-2050-1. If your Spark has a manual transmission, you'd need a tow bar like the Roadmaster # RM-522 Falcon 2 All Terrain Tow Bar that you looked at, a base plate kit, safety cables, a wiring harness to connect to the motorhome, a supplemental braking system and possible...
view full answer... - Tow Bar Wiring Kit for 2019 Ford F-250 King Ranch Edition with LEDs Around Tail LightsI did take a look at the tail lights that come on the Ford F-250 King Ranch edition and I can see what you're referring to with the LED lights. When installing the Roadmaster Tail Light Wiring Kit # RM-152-LED-7 you need enough space to drill a 1" diameter hole in each of the tail light housings. If you don't have the room inside the tail light housing because of additional LED lights around the lenses, you may need to switch from a bulb and socket kit to a diode kit like the # RM-15267....
view full answer... - Recommended Flat Towing System for 2012 Scion xDFor your 2012 Scion XD, the Blue Ox Base Plate Kit - Removable Arms # BX3778 is a confirmed fit that will require some trimming of the fascia. I've attached the installation instructions to assist. The Blue Ox Alpha 2 Tow Bar - Motorhome Mount - 6,500 lbs # BX7380 will be a great fit for your vehicle and these base plates. This comes with the safety cables you need. For your wiring, I recommend the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket -...
view full answer... - Tow-Bar Wiring Kit for flat towing a 2013 Chevy SonicFor tow bar wiring for a 2013 Chevrolet Sonic, the best option is the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket, # RM-152-LED-7. We have an installation video created of this product being installed on a 2015 Chevy Sonic. Please note the linked video below. If you do not already have the other needed items for a complete flat tow set-up for your Sonic, I suggest the Blue Ox Base Plate Kit # BX1703 and the Blue Ox Alpha Tow Bar # BX7380. This...
view full answer... - Recommended Flat Tow Setup For A 2022 Chevy SparkI went ahead and checked the owner's manual for the 2022 Chevrolet Spark, and as long as you don't have an automatic transmission version, then you'll have no issues flat towing your vehicle. If you're planning on getting the automatic transmission version of the Spark, then you'd need to use a towing dolly. If this is the version you plan on getting, the Demco Kar Kaddy SS Tow Dolly with Disc Brakes # DM9713045 is a great option. This tow dolly has a maximum towing capacity of 4,800-lbs,...
view full answer... - Bulb With Socket Kits and Wiring Kits For Flat TowingHere is a list of the different bulb and socket kits we currently offer. Roadmaster Tail Light Wiring Kit with Bulbs # RM-155 Blue Ox Tail Light Wiring Kit - Bulb and Socket # BX8869 Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red # RM-152-LED Blue Ox Tail Light Wiring Kit for Towed Vehicles - Integrated LED Bulb and Socket - White # BX88269 Blue Ox...
view full answer... - Recommended Parts to Flat Tow a 2006 Mini Cooper STo flat tow your 2006 Mini Cooper S you will need the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Crossbar-Style Base Plates item # e44ZR Base Plate Kit - Roadmaster Crossbar Style Base Plate Kit - Removable Arms item # 521876-1 Wiring Harness - Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector item # RM-152-LED-7 Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 High Low Adapter -...
view full answer... - Diode lighting Kit Needed For Flat Towing A 2020 Jeep Gladiator With LED LightsSince you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 will not work. Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7.
view full answer... - Is There a Base Plate Kit Confirmed to Fit a 2010 Mini Cooper SThe Roadmaster EZ Base Plate Kit # 521877-1 states that it works with both the hard top and convertible "S" models of the 2010 Mini Cooper. I did verify this with the manufacturer. I do recommend verifying in the owners manual that your Mini can be flat towed. I tried looking this up for you, but did not find much on the subject. You will also need a tow bar, safety cables, tow bar wiring and a supplemental braking system for flat towing. Tow Bar: Roadmaster Falcon All Terrain, Non-Binding...
view full answer... - Setup Recommendations for Flat-Towing a 2008 Ford Explorer Sport TracI went ahead and looked up the owner's manual for your 2008 Ford Explorer Sport Trac and I confirmed with Ford that you can flat-tow your vehicle behind your motorhome whether you have a rear-wheel drive or a four-wheel drive model. However, it is always important to consult with the owner's manual to make sure that you abide by all other flat-towing guidelines put forward by the manufacturer. The manual discusses extra products you need for both drivetrains that are only available through...
view full answer... - Complete Flat Towing Setup For A 2020 Chevrolet SonicSure thing! For your 2020 Chevrolet Sonic Hatchback, you're going to need: -A base plate kit, Blue Ox Base Plate Kit # BX1703, -A tow bar, the Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates # C26FR, -A wiring kit, Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector # RM-152-LED-7 with the fuse bypass # RM76512, # RM76511 & # RM76511. Those 3 fuse bypasses are only for models with keyless entry, if your Sonic does not have keyless entry then you only need one...
view full answer...
- What Flat Towing Package Would Work For MY 2019 Chevrolet EquinoxWhen it comes to flat towing your 2019 Equinox there are a few items that will be similar to the items you saw already. The main difference would be the RoadMaster Baseplate # RM-523193-5. This baseplate is a direct fit for you vehicle. It is the direct connect style. From the baseplate any RoadMaster tow bar would work for you. I recommend The Falcon 2 # RM-520. The Falcon 2 is rated for 6000 pounds and will connect directly to your baseplate. For the wiring of the vehicle I recommend...
view full answer... - Looking For A Tail Light Kit With White BulbsThe Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 does not come with white LED bulbs and only red replacement LEDs are offered for it. We do have the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155. The bulbs are white but not LEDs.
view full answer... - Parts Needed to Flat Tow 2015 Manual Transmission Mitsubishi Mirage Behind MotorhomeA 2015 Mitsubishi Mirage with a manual transmission can indeed be flat towed with the transmission in neutral. For starters, you'll need a base plate, # BX2002 from Blue Ox. For a tow bar, use the Blue Ox Alpha2, part # BX7380. To wire the taillights, I'd recommend a bulb and socket kit like # RM-152-LED-7 which allows the wiring to remain independent of the vehicles taillight wiring system. It's like using a magnetic mounted tow light set that you'll only need to install once, without...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Written by:
Mike S
Test Fit:
Ryan G
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.