Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.11
Confirmed to Fit
2004 Saturn Vue
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (249)
- Q & A (0)
- Photos
2004 Saturn Vue - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (249 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
by: George 03/16/2023
2011 Mini Cooper
Had a little confusion with tail light hook up. Re read instructions. Went in fine. Works great on my 2011 Mini Cooper Countryman S when coupled to Monaco Diplomat.
25
249
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Is The Roadmaster Crossbar-Style Base Plate Compatible With A Double Tube Bumper On A 1999 Jeep TJ?Good news is yes, the Roadmaster Crossbar-Style Base Plate Kit # RM-521424-4 that you mention will work with just fine with your double-tube bumper, as well as your 1999 Jeep TJ. With that being said, in order to use the: -Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522, you are also going to need to use the: -Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00. Additionally, if you're interested in a complete flat tow setup,...
view full answer... - Base Plates Compatible With Ready Brute II RB9050-2 Tow Bar for 2016 Cadillac SRXIf used with the # BX88297 adapter, the Blue Ox # BX1690 base plate kit is compatible with the Ready Brute Elite II tow bar. To complete your towing system, you'd need safety cables like # RM-643 if you don't have them already, a taillight diode wiring kit like # RM-152-98146-7. Assuming your vehicle is at factory ride height using the stock tire size, the base plates will sit about 16-1/2 inches above the pavement. If this is more than 3 inches higher or lower than the receiver height...
view full answer... - Recommended Equipment for Flat Towing 1999 Jeep Wrangler Behind MotorhomeIt certainly looks like you're on the right track, good job! The # RM-521424-5 direct connect base plates are exactly what I'd recommend. A direct connect base plate doesn't require a crossbar, which makes hitching up and removing the vehicle from the tow bar simpler, and it makes for a much cleaner looking installation. The Roadmaster # RM-522 tow bar is also my go-to. The bar will self align as you pull off, which makes hooking up much easier because the Jeep won't need to be precisely...
view full answer... - Recommended Tow Bar Wiring Kit For A 2022 Ford Bronco For your 2022 Ford Bronco I recommend The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7. This completed kit includes everything that you will need to connect your RV's tail, brake, and turn signal lights to your Ford Bronco. The diodes in the kit prevent feedback and wire your Bronco to operate as a combined system. It is a one time set up and allows you to easily hook up and go instead of running magnetic lights to the...
view full answer... - Blue Ox BX7365 VS BX7380 Tow BarsThe Blue Ox BX7365 "Alpha" tow bar has been discontinued and was replaced by the # BX7380 "Alpha 2" which includes an improved non-binding system, and now includes safety cables. Otherwise their specifications are the same. Since the BX7365 that you received is used, you should keep in mind that the warranty period was only 3 years and all tow bars only have a 7 - 10 year life span. Depending on its age, you may want to consider replacing it with the new Alpha 2. I believe if you call...
view full answer... - Recommended Flat-Tow Wiring Harness for a 2009 Honda CR-VThe flat-tow wiring harness I recommend for a 2009 Honda CR-V is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 if the tow bar does not have channels for the umbilical and safety cables or the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-98146-7 if it does. These kits are my personal favorites as they require minimal modifications and are very reliable The Falcon 2 does not have channels whereas the Falcon All-Terrain does have channels....
view full answer... - Base Plate Kit for a 2017 Jeep Grand Cherokee Trailhawk 4WDI have a solution for you but there is no Blue Ox baseplate kit available for the 2017 Jeep Grand Cherokee Trailhawk 4WD. You will need to use the Curt Custom Base Plate Kit - Removable Arms item # C46JR. This base plate kit will work with Blue Ox tow bars without an adapter. To flat tow your Jeep you will also need: Roadmaster InvisiBrake Supplemental Braking System item # RM-8700. Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord item # RM-152-98146-7. Roadmaster...
view full answer... - Roadmaster Direct-Connect Base Plate Compatibility With A Roadmaster Falcon Tow BarYes, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521451-5 you mentioned will fit your 2022 Jeep Cherokee Trailhawk. This base plate is also compatible with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422. If you're interested in completing your flat towing setup, you're also going to need: -A wiring kit, Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7, -A charge line kit, Roadmaster Battery Charge Line Kit for Towed...
view full answer... - Blue Ox Flat Towing Base Plate Fit for 2021 Jeep GladiatorAccording to Blue Ox, the Gladiator uses a slightly different base plate, part # BLU53FR. According to Blue Ox, there are slight differences at the front of the vehicle that would prevent the # BX1139 from fitting. For a compatible tow bar, I'd recommend the etrailer brand SD non-binding tow bar, part # e47ZR. The non-binding feature allows for each disconnecting even if the vehicle isn't on level ground. The tow bar will self-align which is also a nice feature as the vehicle won't need...
view full answer... - Can 2020 Kia Forte With Manual Transmission Be Flat TowedA manual transmission equipped vehicle can typically be flat towed with the ignition in the ACC position and the manual transmission in Neutral. I checked the 2020 Kia Forte owner's manual, which makes no mention of recreationally towing the vehicle so I'd recommend checking with your dealer to ensure the vehicle can be towed just for the sake of safety. If you confirm that it's acceptable to flat tow, and the vehicle is NOT equipped with fog lights or the Smart Cruise Control feature,...
view full answer... - Parts Needed To Flat Tow 2009 Buick Enclave FWD Behind A Motor HomeYou will only need a few parts to flat tow your Enclave. First you will need a base plate kit made custom for your towed vehicle. The Roadmaster # 523149-1 would be a good choice. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. When your coach and towed...
view full answer... - Parts Needed to Flat Tow 2017 Ford Explorer With Roadmaster Falcon 2 Tow BarOk, so there are a number of parts you will need in order to set up your 2017 Ford Explorer with a 3.5L engine to flat tow with your Roadmaster Falcon 2 Tow Bar # RM-520. The first thing you will need are base plates, and I recommend going with the Roadmaster direct connect base plates for the easiest connection as well as the cleanest look for your '17 Explorer. The correct fit for these is going to depend on if your Explorer has Active Air Shutters or Adaptive Cruise Control; if it has...
view full answer... - 2017 Ford Explorer Flat TowTo swap your flat tow vehicle from a 2012 F-150 to a 2017 Ford Explorer you will only need a few parts for the transition. First you will need a base plate kit unique to your 2017 Explorer. I recommend the Blue Ox # BX2668 kit which will connect to your Aventa, Aladdin, Alpha, or Anvil Blue Ox tow bars. You will also need safety cables to keep the towed vehicle connected to your coach in case of a tow bar failure. I would recommend the Roadmaster # RM-645 which are 64” long and rated...
view full answer... - Base Plate Kit for 2006 Jeep Wrangler Towed with Roadmaster FalconWe have the Roadmaster base plate kit part # RM-521424-4 which is a confirmed fit for your 2006 Jeep Wrangler and will work great with the Roadmaster Falcon tow bar you have now # RM-525. Then for a lighting kit the Roadmaster part # RM-152-98146-7 would be a really great solution that uses diodes to activate the taillights of the Wrangler.
view full answer... - Base Plate Kit and Flat Towing Accessories Recommended for 2021 Jeep Grand Cherokee TrailhawkThe Blue Ox # BX1143 is a fit for the Jeep Cherokee, not the Grand Cherokee so it won't work for your vehicle. For your 2021 Grand Cherokee, you'll want to use # BX1128, which Blue Ox confirms will fit your vehicle. Blue Ox states that this base plate kit only works with motorhome mount tow bars, as opposed to vehicle mounted models that use a trailer coupler and attach to a trailer ball on the motorhome. The Blue Ox Alpha 2 tow bar, part # BX7380 would be a good choice. The tow bar includes...
view full answer... - Recommended Baseplate For A 2012 Jeep Wrangler Unlimited With A Sterling Tow Bar The crossbar for your older Sterling Tow Bar can be removed to utilize the Direct-Connect attachment points and connect to the Roadmaster Direct-Connect Base Plate Kit # RM-521448-5, which will fit your 2012 Jeep Wrangler. Just pull the pin and clip on each leg and release the crossbar from the tow bar. Note: This baseplate was designed to fit a factory bumper, if you have something else let me know. If you haven't already purchased all the other components to flat tow your Jeep then...
view full answer... - Does Roadmaster Flat Towing RM-155 Bulb and Socket Kit Fit a 2020 Chevy EquinoxIt will depend on the trim level of your 2020 Equinox. If it's an L, LS or LT model, you will be able to use the # RM-155 Roadmaster bulb and socket kit. If it's a Premier model, you'll need to use a different option. The Premier model uses variable voltage taillights that would require a smart diode. If the taillights on the Premier model are incandescent, use # RM26FR. If they're LED, use # RM38FR. I've linked to some installation videos that you might find helpful.
view full answer... - All Parts Needed to Flat Tow 2021 Chevy TraverseWe can get your 2021 Chevy Traverse set up to be flat towed, and I'll go ahead and list out all the parts you need below. As far as the braking system, the fixed system does require more install steps than a portable system, but is a huge time saver overall. You won't have to set up a fixed system every single time you tow, you can just connect and head out, so that's definitely the option I recommend, along with the following: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit...
view full answer... - Can Trailer Wiring of 2022 Chevy Equinox Work as Tow Bar WiringTrailer wiring can not be used as tow bar wiring as the converter does not allow the wiring to basically work in reverse. I wish it was the simple and convenient but tow bar wiring will have to be totally different from trailer wiring. What you'd want is a kit like the Roadmaster # RM-152-98146-7 which uses diodes to connect to your 2022 Chevy Equinox. I attached an install video for this kit on a similar 21' Equinox for you to check out as well.
view full answer... - Wiring Harness and Braking System Recommendation for Flat Towing 2003 Chevy 2500 Behind MotorhomeI'd be happy to help with that. In addition to the tow bar and base plates he already has, he'll also need safety cables like # RM-643. For a diode wiring system that would allow him to use the existing taillights on the truck, I'd go with the Roadmaster # RM-152-98146-7. For a supplemental braking system, I prefer a portable system like the Blue Ox Patriot # BLU37TR. A portable system won't need to be permanently mounted to the vehicle, and can be moved to a different vehicle easily later...
view full answer... - Recommended Wiring Kit for Flat Towing 2020 Ram 1500 Behind RVFor your 2020 Ram 1500 I really like the Roadmaster Diode Flexo-Coil Wiring Kit # RM-15267, which includes everything you need to wire up the truck so that its tail lights accept the signal lights from the RV during travel. You will use it to tap into the tail light circuits on your Ram and it includes a 6-Way connector that gets mounted to the front bumper, along with enough coiled wiring to go from there to the 7-Way on the motorhome. If your tow bar has accommodations for the wiring...
view full answer... - Complete Flat Tow Setup for a 2021 Tiffin Allegro Red MH Pulling A 2020 Jeep WranglerThe reason that your Class V is only rated for 5K when it's rated for far more than that normally is because your motorhome is only rated for a maximum towing capacity of 5,000-lbs. However, when you flat tow a vehicle all of the vehicle's weight is taken on by the tow-bars not the necessarily the hitch itself. So, all you'd need is to use a set of tow bars that can handle your Jeeps weight. That said, for a complete flat towing setup you're going to need: -A base plate kit, Blue Ox...
view full answer... - Parts Needed To Flat Tow 2023 Subaru CrosstrekThe only 2023 Subaru that has a base plate for flat towing at this time is the 2023 Subaru Crosstrek. Keep in mind, you can only flat tow the Crosstrek if it has a manual transmission. You will need the following parts to make a "kit": -Roadmaster Direct-Connect Base Plate Kit # RM-52927-5 -Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 -Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 -Brake Buddy Select 3 Portable Supplemental Braking System # HM39524
view full answer... - How to Dinghy Tow a 2017 Nissan VersaAccording to page 10-17 in the online version of the owner's manual for your 2017 Nissan Versa, if the vehicle has a manual transmission then it can be flat-towed with four wheels down but if it has an automatic or continuous variable transmission (CVT), it must be towed using a tow dolly under the drive wheels. If you have the automatic or CVT transmission then I recommend the Roadmaster Tow Dolly part # RM-2050-1. This dolly has electric brakes for safety. It also comes with lights...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product