2006 Ford F-250 Super Duty Front Mount Hitch

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

This is an easy decision to make since the Curt Front Mount Trailer Hitch #C73ZV is the only model that is compatible with the Power Wagon trim. The only exception is if you have a diesel but it looks like the Power Wagon comes with a Hemi V8 so…

In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I…

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount…

The placement of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR will not restrict air flow into your intercooler or void your warranty on your 2022 Ram 3500. The area the receiver mounts is also the same area the front license plate…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round…

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

We don't have an install video for the EcoHitch front hitch part #EH37FR yet but I did attach the diagrams I took from the install instructions that show where you'll trim and what saw to use.

The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…

Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does…