Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $117.80
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $117.80
You Save: $53.61
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Chad07/26/2023
Works perfect for what I needed
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Howard 08/12/2022
WOW - MUCH better than attaching my big cab-over camper to the bumper with chains in the back and a welded piece of 2X2 square tubing attached to the frame in the front.
Very easy to install - just had to go get a couple drill bits - no big deal. These tie-downs will be much stronger than any S-hooks or turn-buckles could possibly bend.
I did use threaded connecting links rather than S-hooks - I think they will hold better.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Can I Use the Brophy Clamp On Camper Tie Downs on 2019 Ram 2500 With Double Walled BedAs long as the double wall still allows for the clamp on the underside of your bed rail, the Brophy Tie-Downs # HSSF will work on your 2019 Ram 2500. The brace on the bottom is adjustable so it will account for the additional wall on the inside of the bed. If you don't have the lip under the rail then you may want to instead consider the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF since they won't utilize that lip or the inside of...
view full answer...
- Camper Tie Down Recommendation for a 2006 Ford F-350 DuallyThe # HSSF should work well as a tie down system for your 2006 Ford F-350. But you may want to check out # TDSF to see which would work better for your application. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where...
view full answer... - Which Brophy Camper Tie Downs For 2000 Ford F-350 DuallyThe # HSSF should work well as a tie down system for your 2000 Ford F-350. But you may want to check out # TDSF to see which would work better for your application because you have a dually model. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF in the past and which is better for dually models. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF...
view full answer... - Will Brophy Camper Tie Downs Work Well on 2006 Chevy SilveradoTorklift frame mounted camper tie downs are the best option out there for securing a camper to a truck bed. But that said the Brophy camper tie downs part # TDSF which are a universal style of fit do work really well for our customers who have tried them. The price for them is really hard to beat as well. We've not had any reliability issues with these at all either. The only issues we've ever had are that they don't fit every stake pocket out there. We do know they'll fit Silverado stake...
view full answer... - Is the HSSF or the TDSF Slide In Camper Tie Down a Fit for 2012 SilveradoAccording to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you will get a better idea of how the tie downs attach to the top of the bed rail. The tie downs do not have a specified weight rating, but they are more than strong enough to handle any slide-in camper that will physically fit in your truck bed.
view full answer...
- Recommended Tie-Downs for 2019 Ram 2500 Short Bed with Running Boards/StepsWe do have camper tie-downs that will fit on your 2019 Ram 2500 but since you have the running boards none of the TorkLift Tie-Downs will fit. You could use parts # TLD2140 and # TLD3113 if you removed the running boards (or steps) but since I doubt that's something you want to do we need to look into alternatives. One of the most popular options on our site is the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF which you would use with the Turnbuckles # TDHP. These drop into your...
view full answer...
- Camper and Tie-Down Recommendation for Ford F250 Super Duty with 6-1/2 Ft BedI spoke with one of our local RV dealers here in Saint Louis and he said that they offer a 6.8 and 8.6 Ft truck camper that would work with your truck. You will need to drop or completely remove your tailgate before hauling this type of camper. When choosing a camper you will also want to make sure that you do not exceed the weight capacity of your truck. When it comes to tie-downs, I personally recommend going with our custom fit TorkLift camper tie-downs like the # TLF2012 and # TLF3006....
view full answer... - Will Brophy Stake Pocket Mount Camper Tie Downs Fit a 1965 Chevy C-10 Pickup TruckBased on your measurements I do not see any issues with installing the Brophy tie downs, # TDSF on your 1965 Chevy C-10. The tabs, or spacers if we are talking about the same thing, do not have to be removed but can be. It is the tab at the top, side of each bracket and the bolts that go through those and through the bed side that hold the brackets to the bed. I have included a picture that is of the instructions for these tie downs for you.
view full answer...
- Camper Tied Down Set Up For A 2008 Ford F-450 Super DutyThe Brophy Stake Pocket Tie Downs Item # TDSF and the HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles - Qty 4 Item # LC182894 are both compatible with the 2008 Ford F-450 Super Duty. Keep in mind the stake pocket tied down do require drilling to get them installed. You will also need the HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 Item # LC182898 to work with the Quick-Load Turnbuckles.
view full answer... - Which Brophy Camper Tie Downs Fit 2011 Chevy Silverado Long BedI do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2011 Silverado. The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your truck. You'd also need the hardware kit part # TDHP as well and you'd be set.
view full answer... - Recommended Camper Tie-Downs For 2000 Ford F-350 DuallyFor your 2000 Ford F-350 Super Duty, I suggest the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLF4006 for the front. And for the rear, the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLF3001. You will need turnbuckles too, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs, # TLS9529-2-LK. I like the quick-release levers on these turnbuckles that make it fast and easy to secure your truck bed camper. Please note the linked product review and...
view full answer... - Brophy Camper Tie Downs that Fit 1988 Ford RangerThe Brophy Camper Tie Downs part # TDSF that you referenced are a fit for your 1988 Ford Ranger and will work well. We had a customer with a similar Ranger use these and they told us they worked great afterwards. The hardware kit you'd also need to attach these to your camper is the # TDHP.
view full answer... - Camper Tie Down Recommendation for a 2011 Ford F-150 HSSF and TDSF ComparisonThe Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2011 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Camper Hold Down Black Powder Coated Finish, # HSSF Recommendation for a 1992 Chevy TruckFor your 1992 Chevy Truck you would want Camper Hold Down Black Powder Coated # HSSF. The hold downs wrap around the truck bed rails and mount inside the bed. They do not fit in the stake pockets. These hold downs will work for any camper that is a correct fit for your vehicle. The Camper Tie Down # TDSF that you referenced will not work on your vehicle as it is only designed for Chevy trucks that were made before 1988 Chevy trucks.
view full answer... - Recommended Stake Pocket Anchors for a 1996 Ford F-250 For your 1996 Ford F-250, I recommend going with the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF. These are universal anchors that will work with your 96 F-250, can be used in any pocket, and measure 5-1/2" tall x 1-7/8" wide x 3/8" thick. These anchors do require drilling so this is going to be a permanent install, however if you'd prefer a non-permanent install the Brophy Clamp On Camper Tie-Downs # HSSF will work just as good.
view full answer... - Is There a Set of Brophy Camper Tie Downs that Fit 2004 Chevy SilveradoFor your 2004 Chevy Silverado we have a set of Brophy camper tie downs that fit with the part # TDSF but the HSAB is not the correct fit.
view full answer... - Camper Tie Downs for a 2005 Dodge Ram DuallyThe Brophy camper tie downs, # HSSF, fit most domestic full size trucks, but there is not a specific vehicle list that they will fit. You will have to go by the measurements of the tie downs and the installation instructions to determine if they will fit your 2005 Dodge Ram Dually. I have included some pictures that should help. We also have some stake pocket mount tie downs that could fit, # TDSF. With either tie down kit, you can use the Camper Tie Down Hardware Package, # TDHP.
view full answer...
- Will Brophy Stake Pocket Mount Tie Downs Fit a 1996 Dodge RamThe Camper Tie Downs, # TDSF, are a universal item made for full size trucks so they would most likely fit your 1996 Dodge Ram. They will also fit any camper that is a fit for your truck. The Camper Tie Down hardware Package, # TDHP, is the correct hardware for the tie downs.
view full answer...
- Camper Tie Down Recommendation for a 1998 Dodge Ram 3500The portion of the Camper Tie Down part # TDSF that inserts into the stake pocket of the truck measures 1-7/8 inches wide by 1-5/8 inches deep. Based on the dimensions you listed they wouldn't fit as they would be 1/8 of an inch too deep. A better option would then be the Camper Hold Downs, # HSSF. I attached a picture that shows how these will look when installed. You will also need the hardware kit part # TDHP. You should only need 4 of these to secure your camper. These are only sold...
view full answer...
- Camper Tie Down Availability for a 2013 Chevy Silverado that Attach to Bed RailsYes, the Camper tie downs part # HSSF will work on your 2013 Chevy Silverado but there is another option for you to consider. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where as part # HSSF mounts over the sidewall...
view full answer... - Camper Tie Downs for a 2014 Ram 2500 Long BedAccording to Brophy the stake pocket mount tie downs, # TDSF, will not fit 2011 and newer trucks. Tie downs # HSSF are a better option. I have included a link to the installation instructions so you can determine if they would be compatible with your truck since there is no fit guide for these tie downs. But the best option is going to be custom fit tie downs that attach to the frame. I have included a link to the main page for your 2014 Ram 2500. You will need to use the menu to select...
view full answer... - Camper Tie Downs for a 1999 Ford F-150Since you will be putting on and taking of a camper shell and camper in your 1999 Ford F-150 I recommend going with custom fit frame mounted tie downs. This will allow you to easily remove the arms of the tie downs, while leaving the frame mounts in place, for when you want to put on the camper shell. These are going to be the best and easiest. They are also more expensive than bed tie downs and you will need to use the following link and drop down menu to select the option closest to your...
view full answer... - Can Brophy Camper Tie Downs TDSF be Used with 2013 Toyota Tacoma and Palomino CamperYes the Brophy Camper Tie Downs part # TDSF that you referenced will work great on your 2013 Toyota Tacoma and your Palomino 500 camper.
view full answer... - Recommend Camper Hold Downs For 2500 lb CamperBoth the Erickson Tie Down Anchors, part # EM01003 and the Putco Push-Up Tie-Downs, part # P99901, are not designed to be used to hold down campers. The capacity of the Erickson Tie Down Anchors, part # EM01003, is 1,000 lbs. For a camper tie downs, I would recommend using the Brophy Camper Tie Down, part # HSSF. These camper tie downs are made to be used with the bigger size campers and do not have a capacity. If you have a slide-in bedliner, you will have to trim it or remove it to use...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.