Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
Retail:$275.00
Our Price: $250.00
You Save: $25.00
Confirmed to Fit
2014 Mazda 3
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1522)
- Q & A (0)
- Photos
2014 Mazda 3 - Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Electric
- Electric over Hydraulic
- Proportional Controller
- Up to 3 Axles
- Redarc
- Indicator Lights
- Hidden
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.
Features:
- Brake controller activates trailer brakes in proportion to your Mazda 3's braking
- Automatically adjusts trailer's braking based on deceleration of tow Mazda 3
- User-controlled mode gives you direct control of your braking
- Great for off-roading or towing in adverse weather
- Activates trailer brakes independent of tow Mazda 3's brakes
- Dash-mounted knob keeps your Mazda 3 interior looking sleek while giving you easy access to the brake controller
- Lets you adjust braking power with the turn of a dial
- Gives you a manual override at your fingertips
- Offers simple diagnostics with colored LED alerts
- Main unit mounts out of sight behind the dash in any position, direction, and angle
- No more banging your knee on a bulky controller
- No interference with airbags or other Mazda 3 accessories
- Universal wiring harness (included) or Mazda 3-specific adapter (sold separately) required for installation
- Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
- Made in Australia
Specs:
- Application: trailers with up to 3 axles (6 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Works with 12-volt and 24-volt Mazda 3 electrical systems
- Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall
- Control knob dimensions: 1-7/8" long (including knob) x 9/16" wide x 3/4" tall
- Length without knob: 1-1/4"
- Output voltage range: 9V - 32V
- Output current rating: 25 amps continuous
- Maximum charging voltage: 12V DC
- 2-Year warranty
Tow-Pro Elite Operation
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your Mazda 3 in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow Mazda 3's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Elite keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow Mazda 3, perfect for limiting trailer movement while you're cruising.
User-Controlled Mode
The Redarc Tow-Pro Elite comes with a unique feature that lets you respond to any terrain or weather you meet while on the road. The user-controlled mode gives you direct control over your trailer's braking so you can have exactly the level of power output you need for any situation - perfect for off-roading or adverse weather conditions. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your Mazda 3. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow Mazda 3.
To turn on the user-controlled braking mode, rotate the knob counterclockwise and apply your Mazda 3's brakes. Push down on the remote knob twice (2 times within 1 second) and release the brakes. The knob will turn green to let you know that the mode has been activated.
Simple, Out-of-the-Way Installation
Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or having something in your cab that can interfere with your Mazda 3's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. A universal mounting panel is included to ensure a clean, from-the-factory look. Custom-fit panels are available for certain Mazda 3s as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Elite. Do not zip-tie the box to wiring or cables that can shift as you drive.
A Mazda 3-specific wiring harness (sold separately) is available for most newer trucks and SUVs. One end of the custom adapter plugs into your Mazda 3, and the other end will either plug directly into the controller or will splice into the included wiring harness - no need to hardwire to your Mazda 3. If a custom brake control wiring adapter is not available for your Mazda 3, you will need a universal wiring harness (RED69FR - sold separately). A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your Mazda 3.
Proportional Braking
The Redarc Tow-Pro Elite brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow Mazda 3's brakes. If you slam on the brakes in your Mazda 3, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your Mazda 3's braking. This saves wear and tear on the tires and the brakes on both your Mazda 3 and trailer.
The Tow-Pro Elite uses an internal 3-axis accelerometer to sense how your Mazda 3 is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow Mazda 3 and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
EBRH-ACCV3 Redarc Tow-Pro Elite Trailer Brake Controller - Dash Mounted Knob - Hidden - Proportional Brake Controller
Replaces Redarc 331-EBRH-ACCV2
Item # RED44FR
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional - RED44FR
Average Customer Rating: 4.8 out of 5 stars (1522 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.by: Larry05/15/2023
This thing is awesome! I lucked out and the etrailer demo install video was on the same type of tow vehicle I have, so I was able to mostly just follow along for the install. It went in with minimal effort. I tow a 20 ft TT that weighs about 3500 lbs with a Chevy Colorado.
I finally pulled our trailer from storage and had a chance to try out the controller. It is fantastic! My previous controller used bluetooth. With it I had problems with over braking at low speeds. I was constantly adjusting it between town and highway, and I found the adjustment clumsy because my phone locks after a couple minutes of not being used.
The redarc fixed all of that and more! After dialing in the right setting, braking is like the trailer is not even there. It's that good! There is little to none jerking when I stop at low speed. And adjusting it is simple as it is one knob on the dash. This is how a brake controller is supposed to work! I towed 10,000 miles with my "other" controller, and I can't wait to try this out on our cross country trip this year!
And as always, the etrailer folks are great to work with and full of wisdom that they share so I don't have to learn the hard way!
by: Mark06/20/2022
2002 Chevrolet Silverado
I saw the great online reviews of this controller and took the plunge. I bought my 2002 Chevy Silverado K1500 extended cab short bed truck new in 2001. It came with the HD Towing package which include a factory plug in trailer brake wiring loom. I took my time over a 2 day period to carefully install and triple check my install. The Chevy and Redarc wiring wiring descriptions made it easy to join the two harnesses. I used HD crimped plug in connectors further protected with shrank tubing. All wiring was bundled with zip ties after encasing in HD harness protective cover. Zip ties held in place behind the removable panel beneath the steering wheel. The control button is installed on the right side of the steering column within easy reach. Nice install. I read that the light would not go on until a trailer was hooking up. I was elated when we picked up our new cargo trailer and the controller knob light lit up upon hitching up. the first mile of travel allowed easy testing of the system and fine tuning came a few miles further down the road. GREAT PRODUCT!
Mark
6/21/2023
Pulled my enclosed cargo trailer 4800 miles this past year moving to Texas. Trailer brake still functions perfectly. Im sure it will work with other trailers in the future as I will now sell my 20cargo trailer.
by: Happy Camper Solution for Ford Ranger owner Gary04/07/2022
2020 Ford Ranger
It truly amazes me that Ford touts the towing capacity of my Ranger, yet not one dealership I called could offer a solution for a trailer brake controller to be able to pull my little camper. I finally turned to etrailer since they had helped me meet my towing needs in the past with a different vehicle. etrailer's Redarc Tow-Pro Elite Trailer Brake Controller was a perfect solution! They also supplied a terrific video explaining in great detail how to install it in my truck. I preferred the in-dash location using one of the extra twelve volt ports using the optional round adapter insert and found it to be very convenient after a summer of towing. Highly recommend both Redarc Tow-Pro Elite and etrailer!
Happy G.
4/8/2023
Its been great! No problems encountered with the unit.
by: Ron04/15/2022
Love the self-calibration and hidden controller. Great space saver and works as described. I did find the knob location in your video not very good; I could not see it through the steering wheel when driving. As you can see from the picture it is now visible from the driver's seat and easy to adjust when needed. Also, in this location the only hole I had to drill was 3/16" behind the knob and not visible or damaging. I was able to use the knob bracket that came in the kit and just push it into place, very stable.
Ron
4/16/2023
Still working perfectly. I tell people about it every chance I get.
by: Hardwick01/08/2023
2000 Chevrolet Silverado
So far it is anazing! I installed it splicing with the gm wiring harness, and put the box under my console, with the knob in one of the accessory port holes using the knob adapter. The controller calibrated quickly, and works great once you get the gain set correctly. The ONLY thing I don't care for is that the unit stays powered up, so the led stay lit while a trailer is hooked up. I guess it doesn't drain battery much, but I don't care for anything draining my battery, no matter how small.
Hardwick
1/8/2024
Still works amazing. Does its job when needed, stays out of the way when not needed. I love that the only thing can see on this controller is the knob, as the rest is neatly mounted under my console.
by: James08/28/2022
Easy to install and works great. Love the stealth mounting. I get compliments on just the one knob being visible.
James
8/29/2023
Product has worked very well without problems. The only thing I would do differently is where I mounted the control knob. It is at a point where my knee can rub it. Which has a couple times changed the setting from my normal 3 or 4 to 7+ and activated the brakes at to high a pressure locking them up as I came to a stop. Again, not a product problem. Just my placement.
by: David02/04/2024
I installed this on my 2009 Dodge RAM 1500. It replaced the other one I had. This was a challenge to install because of where I had to mount it under the dash. But it was also wired a little different. The former controller had the positive (red) and negative (black) wires reversed from this Redarc controller. When I installed the Redarc the way the other controller was wired the brake lights wouldn't work. Once I got them put right for the Redarc it is working right.
by: Jose 05/07/2024
Chevrolet Silverado
Great quality trailer brake controller, seats very nice, flush in the not use ash tray of my silverado. Lot of configuration options, ensure to read the instructions and watch the installation video, be advised it has no power until you plug a trailer, this had me going for a while :-). Thanks etrailer.
by: Rodney Robinson Jr04/22/2023
Super easy install, save even more time with the plug and play harness. Lean install- only thing you see is the adjustment know- no bulky box in the way.
by: John03/10/2024
I have not used it yet. But i did want to know if i could use it on a small open motorcycle trailer. If i have it on for the lights, will it still effect the braking if i turn the dial to "0" on the dash? Thank you! But I can tell you, very easy to install.
Jenny N.
3/15/2024
Most of the time the smaller motorcycle trailers do not have brakes. Does your trailer have brakes? If they do and you do not want to use them then you can just disconnect the controller harness that connects under the dash. Otherwise, if it does not have brakes then you do not have to work about the controller.
by: John 04/17/2024
2019 Ford Ranger
Works very well and easy to install. I put it in my 2019 Ford Ranger and it works very well. I rarely tow so didn't need the model with more involved installation. I just shut off vehicle auto braking and cruise following which I don't ever use anyway.
Factory wiring harness is right up under the dash and this plugged right in easily.
by: Barry11/10/2022
Superb controller and outstanding service from both etrailer and Redarc. I had some questions concerning the controller interfering with the advanced braking/collision avoidance in my Tacoma, as I had read about. I emailed Redarc in Australia and they promptly answered and even scheduled a phone call! I had a good conversation with them and it turns that that issue does not apply to my vehicle. So I give Redarc 5 stars at least for service. The controller itself is easy to install after watching the video. I would definitely buy the vehicle specific wiring to avoiding splicing. The bracket also made it very easy. I just used it on a long drive pulling a travel trailer. Works great. Some trial and error is all that’s needed to adjust the amount of braking.
I installed it in the center console so it would be easy to reach in case of sway. It also looks like it came from the Toyota factory this way. No ugly box hanging below to hit your knee.
Overall absolutely great device.
I highly recommend both the Redarc Elite and etrailer.
by: Vincent04/19/2024
Nissan Pathfinder
The install was straight forward. Being my second time I was able to install the controller easily and without much complication. I have both a Nissa Pathfinder and Armada, which made the installation easier since both models are similar. The product responds well, still trying to dial in the perfect breaking level.
by: Denise03/29/2021
The Redark trailer brake controller installed easily. In my 2020 Toyota 4Runner. It looks like it came installed from the factory. It’s small and easy to reach when driving. It came with a plastic install panel. This is designed for installing in a hole that you drill in your dash. It will not fit in a knock out space in your dash. There is one that fits the dash perfectly that you can buy from etrailer.
etrailer automatically bundled the Redark trailer brake controller with the correct plug and play wiring harness for my vehicle. It was nice not to have to search for the wire harness. Everything installed perfectly.
I haven’t tested the function of the brake controller yet. I’ll hook up to a trailer this week.
The items arrived in less than a week and the package was in good condition. The order tracking worked great. The tech videos on the etrailer website were really helpful. I’ll purchase from hem again.
Denise
3/30/2022
The trailer brake controller still looks great. It works perfectly, although I don’t tow on a regular basis. When I do tow, the controller is easy to use.
by: Gene G03/20/2024
Easy installation and good instructions. I am extremely pleased with this product. It works very well and have had no issues. I am pulling a hard side camper and close to max weight for my truck and this brake controller is spot on. I like the ease of changing the setting on steep hills as needed. A little hard to pick up on the color change in the daylight when braking but a minor shift of vision corrects this issue. I definitely would recommend this controller to anyone else . The salesman was most helpful in getting me set up. If a grade of 10 is the best then I give the company, salesman and this product a 10. Thank you Gene
by: Nina M02/13/2023
2009 Ford Ranger
Received this order sooner than expected and in rural area! All the parts are in the box which will be installed in a 2020 Ford Ranger for braking a 2009 Casita which is especially important in a hilly area. Have not gotten it installed yet but I plan too! Thank you etrailer.com!
Nina M.
2/14/2024
Working out perfectly! Used it on several camping trips. Great product!
by: Lance05/19/2021
2017 Nissan Titan
I’m going to be up front and say I have not tested this beside driving around town. The install was very quick, maybe 20 minutes in all initially in my 2017 Nissan Titan SV. I do have some concerns though. After install I had no lights to show calibration was going on. From reading the user manual I guess that can happen. First time hooking up the trailer everything seemed fine and the light was blue as it should. Once I turned my running lights on though it began to blink red showing a fault with the cable. I tested everything to make sure it was getting voltage and the wires were correct. After about an hour I found something between my backup camera on the travel trailer and the brake was causing some sort of issue. I removed the camera, unplugged all the cables from the tow pro elite and hooked it back up. Once plugged back in it showed green and blue lights showing it was calibrating. I drove the trailer around town and our relief route. After about half an hour the light turned solid blue. The control is easy to use and looks very nice. I’m unable to get it to switch to user control mode but the proportional and manual brakes works fine. I will update my review after we take it out on a few trips. As of now it seems like a great product, very clean looking and should do a great job.
Sierra K.
6/3/2021
Thank you for your review. I have attached an expert answer that shows a chart of troubleshooting options for this product.
Helpful Links
by: ToughMudder02/07/2023
2008 GMC Sierra
Install was a breeze, nice and clean,love the ease of the controller and the many settings if you want them if not set it and forget it perfect for the truck that is not run everyday uses power only when attached to trailer no extra draw on battery. Would definitely buy again great product!
Toughmudder
2/8/2024
Perfect fit for my up and down hill hauling where an adjustment on the fly is needed going from paved to unpaved roads. Game changer in the mountains with the additional braking of another set of axles. I highly recommend this product to anyone looking a very clean and low profile install it does not get any easier and the quality is top level. Thanks Redarc, Tough Mudder
Mike L.
2/8/2024
@Toughmudder What are you hauling? Inquiring minds want to know....
by: Eric05/11/2024
1994 Chevrolet C/K Series Pickup
This is the third Redarc elite I've installed, the oldest being 4 years ago. They're all flawless, easy to use, more available and less intrusive than anything else. I can pull my single-axle motorcycle trailer empty and not be overpowered, or my 2 axle dump trailer without being underpowered. Spectacular in all regards.
by: 22 Ascent11/06/2022
I liked having the ability to place the controller in an easy to view and use location. The unit works as well as any other controller by other companies that I have used but we’re always hard to see to adjust and bang your knees while getting in or driving. Works well in my Subaru Ascent and when the time comes the old ones in the trucks will be replaced with one of these.
by: Sharon02/12/2024
Although this product cost me $250 plus another $750 to install which including having to buy an additional part (because not everything that you need comes with it), I'm extremely pleased with it. Proportional braking is the only way to go. In addition, do not buy wireless brake controllers. Why? Something happens with your phone and then what? You have no brakes! In addition, you don't have to play around with the dial. Redarc Tow-Pro automatically calibrates the brake pressure. Both my suv and trailer stop in unison, so much so I don't even feel the trailer as a separate unit. Redarc remembers, so you are not recalibrating every time you hitch up your camper. Highly Recommend.
by: KarlS07/06/2022
The Redarc Tow-Pro brake controller has worked flawlessly since I installed it a year ago. I tow a fairly light (2000 pound) pop-up trailer, which can be an adjustment challenge when braking on loose surfaces. I've found it very easy to slightly reduce the setting while on gravel and then return to the correct setting when returning to normal roads.
I purchased the Redarc because I could never get my previous controller to brake smoothly - it would often jerk at low speeds. I think that controller had problems because it was inserted into the 7-pin connector that was held by a metal bracket under my bumper that I suspect vibrated when braking, which confused that controller. Once I switched to the Redarc, which is firmly mounted under the dash, I had no more problems like that.
Finding a location in my Honda Pilot to mount the control module was a challenge - but well worth the effort. I mounted it to a plastic panel that I installed over an unused cavity in the console underneath the radio (see picture). The knob is easy to reach, and is out of the way of my knees.
Mounting the main control box under the dash was made easier because I didn't have to worry about its precise orientation since it will calibrate itself wherever it sits.
by: Darrell 03/28/2024
Best brake controller, I have installed. Requires a little extra time to get it installed. But worth it for the convenience for handy use location. Works great and looks great.
by: Mike W.10/01/2022
Installed the Redarc Tow-Pro elite in a 2022 E350 Thor motorhome. Install was straight forward. Mounted behind the brake pedal with an extended aluminum plate. etrailer was incorrect when I was told Redarc does not make a cable for this model. The available correct cable / plug for this model is the TPH-007 which is the same Ford plug that is on 3036-P. I did splice in the cable that came with the kit in order to reach the desired location.
The controller fit well to the right of the steering wheel. Had to drill thru one of the panel clips which really wasn’t needed.
by: Tim @ Man_Dog_Overland09/23/2022
2017 Jeep Wrangler
This Redarc Break Controller is a must for off-roading with a Off Grid Trailer. The ability to control the trailer separately and allowing you to hold your tow vehicle while descending hills is worth the investment.
25
1522
Show More Reviews
See what our Experts say about this Redarc Trailer Brake Controller
- Can Redarc Tow Pro Elite Brake Controller Install in 2021 Yukon XL DenaliThe Redarc Tow Pro Elite brake controller part # RED44FR can install in your 2021 GMC Yukon XL but you'll need to use the correct brake controller install harness which is part # C51525. You'd have to cut the black connector off of the harness and wire it by color to the harness of the Redarc and you'd be set. This is one of the nicest controllers out there as it uses an inertia sensor to determine how much brake pressure to apply and only installs a small knob on the dash.
view full answer... - Locating the Brake Control Plug on a 2023 Nissan FrontierFrom what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the cavity taped to other wiring. Sometimes it can be difficult to spot because of the tape. I have also included an installation video of the Redarc Tow-Pro Elite Brake Controller # RED44FR on a 2022 Nissan Frontier. At about the 3:40 mark of the...
view full answer... - Availability of Installation Panel for Redarc Tow-Pro Elite on 2004 Toyota Tundra LimitedWe have one mounting panel available for your 2004 Toyota Tundra. The vehicle specific panels only go as far back as the 05 Tundra so you will need the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001. This mounting panel provides a clean backdrop for the control knob installation on your dash or console. It is worth noting that this will require drilling a 25mm hole and two 4mm pilot holes in order to install the panel. If you choose to...
view full answer... - Short Blue Light After Installing the Redarc Tow-Pro Elite on a 2017 Silverado 1500 If no trailer is connected after installing the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR, this will actually be the Active Calibration. The LED will only stay Blue when the trailer is connected. Essentially, whether a trailer is connected or not, just drive normally and Active Calibration will ensure the Tow-Pro Elite learns the correct direction of travel. However, if this is happening when a trailer is connected, you may need to check a few things. I included a picture...
view full answer...
- Which Wiring Harness for RedArc Tow Pro Installation on 2006 Toyota 4Runner with Factory 7-WayThe correct harnesses to wire the RedArc Tow Pro Elite # RED44FR on your 2006 Toyota 4Runner is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota # 3040-P along with # 331-TPH-017.
view full answer... - Redarc Brake Controller and Control Knob Panel For 2021 Toyota TacomaThe Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob Part # 331-TPSI-007 is what is compatible with the dash for the 2012 - Current Toyota Tacoma. I recommend the Redarc Tow-Pro Elite Trailer Brake Controller Part # RED44FR and the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers Part # RED99FR to make the entire installation process simple and straight forward. The capabilities of the controller itself are fantastic as well. The pictures...
view full answer... - Parts Needed to Install Redarc Tow-Pro Elite Trailer Brake Controller on 2019 Subaru ForesterWe can get your 2019 Subaru Forester set up to tow with the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR, as there's just a couple of things you will need. The first is a 4-way, if your Forester does not have one, and the other is a 7-way and installation kit, and we have all of that for you, with the following: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 - Universal Installation Kit for Trailer Brake Controller # ETBC7 First you'll install the...
view full answer... - Parts Needed To Install Redarc Tow Pro Elite RED44FR On 2015 Honda OdysseyI would be happy to recommend everything you need to add the Redarc Tow Pro Elite # RED44FR to your 2015 Honda Odyssey. Your vehicle does not have a factory trailer brake controller port but that is ok, you will just need to hardwire the controller. Since you installed a 4-way connector already you will need to add a 7-way connector using # ETBC7 which will plug into your 4-way connector and require you to run a few wires. You will ground the white wire to the frame, extend the black wire...
view full answer...
- Replacement for Factory Brake Controller On 2014 Ram 3500 for Use With EOH ActuatorIf the factory brake controller is not sending a full 12 volts to the actuator while set to max with the manual override applied then there is an issue and it will need to be repaired or replaced. The factory brake controllers usually don't work very well with electric over hydraulic actuators anyway so a full replacement would be best. For this, you have a few options such as the Curt Echo part # C51180 which bypasses the factory brake controller so you don't need to unhook anything or...
view full answer... - Redarc Tow-Pro Elite Not Calibrating On 2012 Acura MDXA blinking blue light after the manual override is pressed on your Redarc Tow-Pro Elite # RED44FR can mean a couple different things. This may mean the remote head cable may have been damaged. You should check the cable between the remote head and the main unit and inspect for damages. It also may mean the red wire is constantly at low voltage, check voltage to the red wire and reassess the connection point if necessary. Additionally, you should not be receiving voltage on the blue wire...
view full answer... - Redarc Brake Controller Installation on 2021 Jeep Grand Cherokee Limited 80th Anniversary Let's begin with the brake controller. Redarc makes a great product, but unless you plan on towing overland you won't ever need or use the user-controlled mode offered by the # RED44FR Tow-Pro Elite. I'd recommend the Redarc # RED24FR Tow-Pro Liberty which is a completely proportional controller which would work perfectly for the vast majority of folks. I'd hate to see you spend additional money on a feature you might not ever use. If your Grand Cherokee is equipped with the Factory tow...
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty in a 2004 GMC YukonYes. You can install a Redarc Liberty # RED44FR on your 2004 GMC Yukon when you use the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controller # RED69FR and Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM # 3015-S. This will give you a plug and play installation of the Liberty; you'll just need to splice the wired ends together with the butt connectors included with the Tekonsha # 3015-S harness. I've linked some review videos of these parts for...
view full answer... - What Redarc Brake Controller Will Fit My 2020 Mercedes-Benz Sprinter 2500 With Factory Tow PackageWith the factory tow package on your 2020 Mercedes-Benz Sprinter 2500, you will need the following: Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional Part # RED44FR, Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In part # 3063-P, and the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness, part # 331-TPH-017. This brake controller activates your brakes in proportion to your vehicle's braking. The trailer's braking...
view full answer... - How To Install a 7-Way on a 2013 Toyota Tacoma with Brake Controller PortIf your 2013 Toyota Tacoma came with a factory brake controller port then the rest of the wires you need to hook up to the 7-way (12 volt power and brake output) should already be ran to the rear of the vehicle, under the bumper and near the spare tire. However, we have not yet had the chance to install a 7-way on a 2013 Toyota Tacoma with this same setup so I would not have any exact locations to look for these wires. Therefore, it will take some digging as well as testing with a circuit...
view full answer... - Best Brake Controller for a 2019 Ford E-450 CutawayThe best brake controller for your 2019 Ford E-450 Cutaway is the Redarc Tow-Pro Elite Trailer Brake Controller item # RED44FR. The Tow-Pro Elite is very similar in design to a factory trailer brake controller. There is a control box that gets installed under the dash, out of sight and then a control knob that gets mounted on your dash wherever you prefer. This will provide a very clean look and will allow you to mount it in many different locations whereas a standard brake controller will...
view full answer...
- How to Wire Redarc Tow-Pro Elite Trailer Brake Controller to Factory Wiring of 2018 Toyota 4RunnerBasically you'll use all of the wires in the diagram you sent a picture in of except the green. That circuit is an illumination circuit that would not be used. It's normally for controllers that have a backlit display that comes on when the headlights are on. The black wire of the harness runs to the black wire of the Redarc Tow-Pro Elite # RED44FR, the green-yellow runs to the red wire of the controller, white-black of harness runs to white of controller, and yellow runs to blue.
view full answer...
- Dimensions of the Knob for the Redarc Tow Pro Elite Brake Controller The control knob dimensions are 2-3/8" long x 3/4" wide x 7/8" tall. To install the Knob on the item # RED44FR, you will need 1-3/4" of depth, a space 9/16" wide, and 3/4" tall; the size of the hole required is 25/64". The space behind the knob is 1-3/4" I have linked a dimensional diagram below. The Redarc Tow-Pro Elite Brake Controller item # RED44FR is confirmed to fit your 2021 Cadillac XT5.
view full answer...
- How to Install the Redarc Tow-Pro Brake Controller in a 2007 Jeep Wrangler To install the Redarc Tow-Pro Elite Trailer Brake Controller in your 2007 Jeep Wrangler you will need the item # RED44FR. This kit includes the universal wiring harness required. The 2007 Wrangler's did not include a port for a plug in adapter so hardwiring the brake controller is your only option.
view full answer... - Installing Redarc Tow Pro Elite Knob on Dash of 2019 Toyota TacomaThe mounting plate part # 331-TPSI-002 that you referenced is not going to be the right size for the knock out plates on your 2019 Toyota Tacoma but you could drill a small hole in the unused one that you have and install the knob on it and it would essentially be the same thing. The correct install harness for the Redarc Tow Pro part # RED44FR is the part # RED99FR.
view full answer...
- Recommended Brake Controller for a 2018 GMC Acadia Yes, it would! The Redarc Tow-Pro Elite Brake Controller item # RED44FR comes with everything you will need to get it installed on your 2018 GMC Acadia Denali. I did check for a plug in adapter and GM stopped putting in the ports after the 2017 model year. You'll need to use the included universal wiring harness to complete the installation.
view full answer... - How To Tow a Trailer with Brakes Using a 1999 Coachmen SportscoachIn order to tow a trailer with brakes using your 1999 Coachmen Sportscoach on a Freightliner XC Chassis you will first need to convert the 4-way you have into a 7-way using the Universal Installation Kit for Trailer Brake Controller part # ETBC7 along with the extra wire with part # 10-2-1. These two parts will give you all that you need to correctly install the 7-way along with a brake controller of your choice. For a brake controller I recommend using the Redarc Tow-Pro Elite Trailer...
view full answer... - Will the Redarc Tow-Pro Elite Trailer Brake Controller Work On a 2021 BMW X3The Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR will work on a 2021 BMW X3. It will have to be completely hardwired which can be done using the Wiring Kit part # 5506. This entails running a battery charge line and brake output wire from the trailer connector into the cab. Then you must run power and ground wires from the brake controller to the battery followed up with a stop light switch wire which must be spliced into the circuit above the pedal. The Redarc Tow-Pro Elite...
view full answer... - Parts Needed to Install Redarc Tow Pro Elite Install in 2017 Ford ExplorerTo install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR in your 2017 Ford Explorer all you need is the install harness part # RED87FR which plugs into a port under the dash. To see how this installs on a similar 2013 Ford Explorer check out the install video link I attached on this page as well.
view full answer... - Are There Compatibility Issues With Brake Controllers, Adapter Plugs, and 2020 Jeep GladiatorGreat question! Curt Spectrum Trailer Brake Controller - 1 to 4 Axles - Proportional - Dash Mount Item # C51170 is a great option for vehicles with limited cabin space such as your 2020 Jeep Gladiator. It can be mounted virtually anywhere on the dash and doesn't require drilling to be mounted however, the kit does come with a bracket and hardware if you would like to screw the mounting bracket down to give it a more permanent mounting location. Using the Curt Custom Wiring Adapter for...
view full answer...
Do you have a question about this Trailer Brake Controller?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Noah M
Updated by:
Amanda K
Test Fit:
Andrew J
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Michael H
Test Fit:
Bradley B
Test Fit:
John A
Written by:
Alexander C
Video by:
Shane H
Video by:
Amber S
Video by:
Thomas T
Video by:
Schuyler H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larry
5/16/2024
I have this for a year. We did a five thousand mile trip last summer and I couldnt be happier! This is what I imagined a good break controller to be. Braking felt like there was nothing behind me. No shuddering at really low speed. It was perfect! This is in stark contrast to one of those bluetooth units that plug into your 7-pin connector. I could never get that one to work right. I highly recommend this product and all the folks at e-trailer!