bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Ford
  3. F-450 Cab and Chassis
  4. 2019
  5. Tekonsha
FITS 2019 Ford F-450 Cab and Chassis
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps

4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps

Item # 18252
Our Price: $28.77
Custom Fit Vehicle Wiring
Confirmed to Fit
2019 Ford F-450 Cab and Chassis

without factory trailer connector

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.28 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Tekonsha custom fit vehicle wiring for your 2019 Ford F-450 Cab and Chassis are available from etrailer.com. Installation instructions and reviews for your Ford custom fit vehicle wiring. Expert service, and great custom fit vehicle wiring prices. etrailer.com carries a complete line of Tekonsha products. Order your 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps part number 18252 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (209)
  • Q & A (0)
  • Photos

2019 Ford F-450 Cab and Chassis - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps

  • Trailer Hitch Wiring
  • 4 Flat
  • No Converter
  • Tekonsha

This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.


Features:

  • Provides a 4-way flat trailer connector at the back of your Ford F-450 Cab and Chassis to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
  • Works with 2-wire electrical systems
  • Splices into your Ford F-450 Cab and Chassis's wiring with the included quick-splice connectors
    • Bonded wires are color coded (see wiring configuration below) and labeled
    • Included circuit tester helps ensure wiring is correct during installation
  • Includes durable, molded-rubber, standard female output socket


Specs:

  • Harness length: 72"
  • Max amperage: 7.5 amps per circuit
  • Wire gauge: 18
  • Limited 1-year warranty


4-Way Trailer Connector Installation

Because the color/function of the wires on this connector may not match the color/function of those on your Ford F-450 Cab and Chassis, be sure to use the included tester to double check the function of each wire on your Ford F-450 Cab and Chassis's tail light wiring harness before installing this connector. Once you've figured out the functions of your Ford F-450 Cab and Chassis's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.


The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).


Wiring Configuration

Wire Color Wire Function
Green Right turn and brake light
Brown Tail lights and running lights
White Ground
Yellow Left turn and brake light


Quick Tips:

We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:

  • Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
  • Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
  • Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.


18252 Tekonsha Smart fortwo Wiring Harness with Smart fortwo End 4-Pole Connector Kit and Circuit Tester - 6' Long

20252 Alternate

Installation Details 18252 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252

Average Customer Rating:  4.6 out of 5 stars   (209 Customer Reviews)

This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.

by:
2014 Smart fortwo

Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks

Vincent S.

5/31/2020

Just fine.



by:

Awesome product never any issues use along easy install practically don’t need instructions



by:
Chevrolet Corvette

This harness worked great for my Corvet te.



by:

Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.

Etrailer Expert

Katrina B.

11/18/2022

I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.



by:

First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !

Etrailer Expert

Mike L.

3/15/2019

We have a link to the installation instructions as well as some install videos on the product description page.



by:
2006 Ford Focus

The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.

Russell

4/4/2018

The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!



by:

Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.



by:
2007 Ford Focus

This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.

Etrailer Expert

Mike L.

12/17/2018

On the product page, we have a link to the instructions as well as a couple of install videos.



by:
1990 Dodge Van

Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.



by:
1984 Jeep CJ-7

I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.



by:
2001 GMC Sierra

Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have

Kyle

3/23/2018

Perfect!



by:
1992 Dodge Van

Over all good experience
Missed the bolt
package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you



by:

Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.



by:
2006 Chevrolet Malibu

I watched the video online to install the wires and did it all by myself. Product arrived in good condition.

Tj

12/26/2014

No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!



by:
2005 Ford Focus

I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.



by:

I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.



by:

The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.

Etrailer Expert

Jenny N.

11/16/2021

I will have our customer service team reach out to you.



by:
1998 Chevrolet Blazer

Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.



by:

Their customer service is amazing and within a few day my order was here.



by:
2005 Ford Focus

Picture



by:
2003 Ford Focus

Perfect & simple as one, two three then your done. Thanks etrailer
Super Fast delivery from etrailer 5 star*

Big C.

7/27/2016

Everything is still working great.100 satisfied with the hitch and all I purchased.



by:

Exactly what I was looking for. Great price and fast shipping.

Stephen A.

9/19/2019

Works great!



by:
2013 Ford Edge

Worked perfect. I used it to extend the pigtail on my tow dolly. etrailer has great shipping & service. Have bought from them many times.



by:

Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.



by:
Hummer H3

Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.


25
209
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Recommended Trailer Hitch Receiver for 1983 Lindy II RV on a Chevrolet Frame
    I did a little research on your Lindy II RV and it was manufactured by Skyline. There are a lot of different motorhomes that were built on the cut-away van chassis, so the pictures you sent were extremely helpful. With the RV coming out that far from the rear axle, a hitch for the regular van won't work. We do however have universal-fit weld on hitches that you can have installed to allow you to pull your boat trailer. Depending on the drop you need from your frame to get under the...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Recommended Trailer Hitch Receiver For Jayco Travel Trailer To Triple Tow Small Utility Trailer
    It sounds like you have the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 installed on your Jayco trailer. If that is the case you can tow with it, but you are correct that the bumper on your trailer is really the weak point. One option is to use the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" # MO34VR to reinforce your bumper for additional strength. The option I recommend is going with a frame mounted trailer hitch receiver like the Curt Adjustable...
    view full answer...
  • Recommended Trailer Hitch Reciver for 2016 Ford F-150
    I suggest using the Curt # C86HR for a trailer hitch receiver on your 2016 Ford F-150. This is a 2 inch, Class III hitch with a gross towing weight of 6,000 pounds and maximum tongue weight of 600 pounds. It includes all the necessary hardware to bolt it to your truck. I've linked an installation video for you. If you prefer a hitch that has a higher weight rating, the Curt # C26HR is a Class IV, 2 inch hitch rated at 10,000 towing and 1,000 pounds tongue weight. This hitch is also...
    view full answer...
  • Recommended Hitch for a 1966 Chevrolet C/K Series Pickup
    The reason the hitch fit guide asks about a bumper is because it will make a difference on where the hitch receiver sits in relation to the truck's frame. With a standard bumper, the hitch will sit a little higher off the ground and closer to the truck's frame. With a drop bumper, it will require more space between the mounting location and the hitch receiver to fit under the bumper. The bumper is not required for installation though. One option for your 1966 Chevrolet C/K Series Pickup,...
    view full answer...
  • Can a European 7-Way Trailer Connector be Converted to a U.S. 4-Way
    You have 2 options. First you can convert the Ford Focus wiring harness, after installed, to match the trailer. Or you can convert the trailer connector to match the vehicle connector, once it is installed. The easiest thing to do would be to convert the trailer but there may be certain lights and functions required in Europe that are not required in the U.S. I will try to cover both ways for you but there is no simple adapter for either method. To convert the vehicle, first you will...
    view full answer...
  • Are Diodes Needed If Vehicle to Vehicle Tail Light Converter 118158 Is Used to Tow European Trailer
    You will not necessarily need diodes because the back feeding would only be slight and should not be enough to cause any problems. But if you wanted you can still use diodes, # RM-690, one on the right turn/brake and one on the left turn/brake circuits on harness 18252. Basically, they will go before the # 118158 harness on the green and yellow wires.
    view full answer...
  • Parts Needed to Install a Trailer Brake Controller on a 2002 GMC Safari
    In order to install a trailer brake controller on a 2002 GMC Safari you will need to hardwire it to the vehicle. First, you will need a 4-Way trailer connector, # 18252 if you do not already have one. I have included a link to a video showing a typical installation. With the 4-Way installed you will then need to install a 4 and 7 Way Installation Kit, # ETBC7. The 4-Way plugs into the back and all of the wiring and circuit breakers are included to install the brake controller. It will...
    view full answer...
  • Will the Draw-Tite Hitch For a 2011 Ford F150 Have a Factory Appearance
    The majority of this Draw-Tite Max-Frame Trailer Hitch Receiver # 75691 will be hidden behind the rear bumper of your 2011 F-150. It will have the same basic appearance that the factory hitch for this vehicle would have. The hitch opening will be visible, but most of the rest of the hitch will be hidden. Installation instructions are attached. You may be interested in the following products to complete your towing setup: etrailer Ball Mounts # EBMK4 Draw-Tite Wiring # 18252 (installation...
    view full answer...
  • Trailer Hitch Recommendation for 2002 Pontiac Grand Prix SE Sedan to Tow Small Trailer
    The best trailer hitch we offer for your 2002 Pontiac Grand Prix SE Sedan is the Curt Class II hitch part # C12199 which has the highest capacity of all of the hitches we offer, is made in the USA, and will only have the hitch opening hang down below for a more concealed look. Then for trailer wiring you'd want the Tekonsha kit part # 18252 for a 4-way. Then for a ball mount you'd want Curt ball mount part # C45520 and for a hitch ball either # C40018 for a 2 inch ball or part # C40001...
    view full answer...
  • Trailer Hitch Receiver and Wiring Harness For a 1972 Chevrolet K-20 Pickup With Step Bumper
    I do see that a deepdrop rear step bumper was offered on your 1972 Chevrolet K-20 pickup. If this is what you have the Curt 3-Piece Trailer Hitch Receiver # C15511 is the receiver I recommend using. Otherwise the Curt Trailer Hitch Receiver # C14082 will fit the standard bumper which came on the K-20 or one of the aftermarket step bumpers that was often used as a replacement. We do have images on our product pages with both these installed so you can see how they will fit with their style...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness To Pull Trailer with 5th Wheel
    It is certainly possible to pull a trailer behind a 5th wheel which is know as triple towing. In order to do this you'll first need to start with a trailer hitch if you don't already have one. For this, I recommend the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 as it's our best, most popular option. In regards to wiring, the 4-Pole Hardwire Kit with Circuit Tester part # 18252 is what I recommend using which splices into the wires behind the tail light on the trailer.
    view full answer...
  • Parts Needed to Install 7-Way and Brake Controller on 2002 Isuzu NPR
    To install a new, fully functional 7-Way connector on your 2002 Isuzu NPR you will need to start by hardwiring a 4-Way harness. There are not any plug-and-play harnesses available for your particular truck. If your truck has turn signals and brake lights that run on the same bulbs then I recommend the Tekonsha # 18252. If the turn and brake signals are on separate bulbs then you will use the Tekonsha # 119178KIT instead. This kit includes the converter that is needed to combine the circuits...
    view full answer...
  • Recommended Wiring Harness for Back of RV
    In order to install a trailer connector on the back of an RV you can use the 4-Pole Hardwire Kit with Circuit Tester part # 18252 along with the Mounting Bracket 4-Pole Flat part # 18144. This kit will splice in behind the tail lights on the trailer but there are no plug-n-play options. It comes with the connectors you need as well as a test light if your wires don't follow the standard colors. If you don't already have a trailer hitch to complete your setup, I recommend the Adjustable...
    view full answer...
  • Installing a Trailer Brake Controller From Scratch on a 1970 GMC C30 Pickup
    If you do not already have a 4-Way flat connector at the rear of your 1970 GMC C30 then you will want to start off by installing the Tekonsha 4-Pole Hardware Kit # 18252. This will simply splice into your current light functions. I have attached a sample installation video for you to follow. The next step is to install the Universal Installation Kit # ETBC7. This comes with everything that you will need to give yourself a fully functioning 7-Way. Attached is a video of this kit being installed...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2002 Dodge Ram 1500 Conversion Van
    I have another option for you, but the Draw-Tite Trailer Hitch Receiver # 75101 you were looking at is only confirmed to fit select Dodge Ram Pickup trucks and will not fit your 2002 Dodge Ram 1500 Van. Instead I recommend the Draw-Tite # 75140 which is confirmed to fit your Ram 1500 Van and has the same 500lb tongue weight rating and 5000lb trailer weight rating as the # 75101. This hitch would be perfect for carrying a bike rack, cargo carrier, or ball mount for towing a trailer. If...
    view full answer...
  • Hitch Recommendation for a 2007 Ford Focus S Sedan
    For a great tow hitch for your 2007 Ford Focus S, I recommend the Curt Hitch - 1-1/4" # C11294. Not only does this hitch include a super easy installation process that only takes about 30 minutes to complete, it also comes with a higher-quality gloss outer coating over the base powder coat that provides better resistance against rust than the competitor Draw-Tite option. With this factor, you do not need to worry about deterioration. It comes with all mounting hardware required for a bolt-on...
    view full answer...
  • Adding 7-Way Connection to 2021 F-350 Cab and Chassis Without OEM Tow Package Wiring Harness
    It sounds like you are missing the required factory 7-way connector for the # C55774 Curt T-Connector Wiring Harness to plug in to. This part will only work if you have the OEM tow package wiring harness. I recommend the Tekonsha # 18252 4-Pole Hardwire Kit with Circuit Tester. This will give you a 4-way trailer connection. I also recommend the # ETBC7 Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat. This will give the the 7-way connection like the Curt...
    view full answer...
  • Trailer Running Light Pin on 2013 Ford F-150 Trailer Connector has No Power
    It could be a tow package fuse or relay that is causing the trailer running light circuit to fail on your 2013 Ford F-150. In the power distribution box the fuse that feeds the trailer park lamp relay is in position 6. Also check position 67. I am almost certain that it is a fuse/relay that needs to be replaced but if not then like you said this is an issue somewhere in the wiring that will need to be tracked down.
    view full answer...
  • Will a Trailer Hitch from a 2003 Toyota Tundra Fit a 2011 Dodge Ram 1500
    No, the trailer hitches that fit a 2003 Toyota Tundra are fundamentally different than those for the 2011 Dodge Ram 1500. I have included a link to the hitches that fit the 2011 Ram 1500. The most popular is Curt hitch # 13333. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise...
    view full answer...
  • Determining Wire Functions on 2000 Ford F-250
    It sounds like you are needing to determine the functions of the wires on your 2000 Ford F-250. The best method for this is to simply test each wire with a circuit tester like # PTW2993. You can have a buddy sit in the cab and activate each lighting function while you test the wires. Because wire colors used on vehicles can change from year to year and model to model, going by color alone is not typically recommended. If you do not have a factory connector installed, you can use the Tekonsha...
    view full answer...
  • Will Installing the Curt Class I Hitch # 11114 on the 2008 Saturn Sky Void the Vehicle Warranty
    The Curt Manufacturing Class I Trailer Hitch Receiver with Drawbar, item # 11114, for your 2008 Saturn Sky, will not void the vehicle warranty as long as all of the towing limitations of the vehicle and the hitch are closely adhered to. There is a federal law called the Magnusson-Moss Warranty Act, which states that unless the modification to your vehicle, in this case the hitch, caused the problem your warranty must be honored. This being said you will need to use common sense precautions...
    view full answer...
  • Plug and Play Trailer Connector for 2003 Ford F250
    A plug-in type, or T-1 connector is not available for the 2003 F250. The harness you have looked at, part # 18252 is the only harness offered. Installing this item is very simple. The white wire grounds to the truck frame, the yellow wire would tap into the wire feeding the left directional/brake light, the green wire taps into the wire feeding the right directional/brake light, and the brown wire taps into the running light circuit. Accessing the rear of each taillight assembly provides...
    view full answer...
  • Trailer Hitch That Could Fit Rear of Camper Trailer
    The Curt hitch part # 13703 that you referenced would be the best option we have most likely as it fits the most applications. Basically as long as the frame of your camper is between 22 and 72 inches in width when measured from outside to outside this hitch will fit and work great for towing an ATV or SXS trailer. I attached an install video for this hitch on a similar camper for you to check out as well. To add a 4-way then you'd just want the part # 18252.
    view full answer...
  • Trailer Wiring Harness for a 1980 Jeep CJ-5
    To add a trailer connector to your 1980 Jeep CJ-5 you can use # 18252. This is a hardwire installation. All you will need to do is identify the functions of the taillight wires on your Jeep and then splice in this harness's wires accordingly. You can use a circuit tester such as # PTW2993 to test the Jeep taillight wires for function. On the wiring harness the white wire will ground to the vehicle frame. Yellow is for combined brake light and left turn signal. Brown is for taillights,...
    view full answer...


< Previous
123. . .30



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Rick A
Test Fit:
Rick A
Employee Shane T
Test Fit:
Shane T
Employee Jared G
Test Fit:
Jared G
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Mike H
Video Edited:
Mike H
Employee Sue W
Video Edited:
Sue W
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Sabrina W
Updated by:
Sabrina W
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.