Wiring Extension for Use with a Roadmaster Sterling Tow Bar  

What you need is a fuse bypass. If your fuse is 20 amps or less you can use the Blue Ox Fuse ByPass Switch #BX88272. However, based on what other Honda Fit owners have reported it sounds like you have a 30 amp fuse. If that is the case, you will need…

The correct base plate for your 2022 Jeep Wrangler Rubicon is the Roadmaster Direct-Connect item #RM-521453-5. The direct connect arms are removable and will connect to your Nighthawk Tow Bar item #RM-676. I have linked an installation video below to…

The Blue Ox BX1136 base plates are no longer available. They went inactive on our site when we ran out of our stock of them. They are supposed to be replaced by a new model, but they are not yet available. Currently, for your 2015 Jeep Cherokee…

The 4-Pole, Round Pin Trailer Wiring Connector #PK11402 is a standard size used in North America. Do understand that while there is a standard wiring pattern it is possible to be wired differently which could cause issues.

The Mopar Recreational Flat Tow Wiring Kit part 68321424AB is required on select Jeep Cherokee's in order to activate the electronic power steering (EPS) system while the vehicle is in tow mode. This part must be obtained from the dealer but…

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

The line that you need to connect the RV to the Towed Vehicle is part #RM-921004-88 from the BrakeMaster kit. You only need one of these. It has a male and female end. I recommend to use the RoadMaster BrakeMaster Second RV Kit part #RM-98200 that…

The Blue Ox Patriot 3 was the older model system and was recently removed from our website because we sold all of our inventory. The newer model Blue Ox Patriot item #BLU37TR is compatible with your 2022 Jeep Cherokee Trailhawk. The difference in the…

We have all of the parts you are needing. First things first you will need to add a base plate kit to your 2021 Jeep Grand Cherokee Trailhawk 4WD. I recommend the Roadmaster Direct Connect Base Plate Kit #RM-521451-5 due to it having removeable arms…