Ford Maverick Vehicle Tow Bar Wiring

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…

Yes, it does Gary! The Blue Ox Base Plate Kit item #BX2914 has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

Hey Ed! It looks like you put together a great list of parts. I'm going to list everything out here with links so it is all in one place, including my suggestions. For a complete setup you will need the following: -etrailer Invisible Base Plate…

Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit: Roadmaster…

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…