T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118381
Our Price: $21.22
Confirmed to Fit
2004 Jeep Grand Cherokee
with factory Tow Package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (161)
- Q & A (0)
- Photos
2004 Jeep Grand Cherokee - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Jeep Grand Cherokee using this custom wiring harness. T-One connector plugs directly into existing factory 7-way - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily to your existing 7-way - no cutting or splicing of wires
- Locate connection points behind rear bumper
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118381 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118381
Average Customer Rating: 4.6 out of 5 stars (161 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle using this custom wiring harness. T-One connector plugs directly into existing factory 7-way - no cutting, splicing or tapping required.by: Bryan 07/17/2022
Right part, easy to install, straight forward harness.
by: Dan 11/06/2023
2001 Dodge Ram Pickup
Great product,easy installation!
by: Steve V04/20/2019
Super easy installation, 30 mins (including tool take out and put away). Exact fit, with ALL necessary parts. etrailer has exceptional customer service and offers exact fit parts at great prices!
by: 09/08/2023
We have not received this yet? Is it being shipped separately?
Katrina D.
9/14/2023
I do see that your order was split, and the package containing 118381 was scheduled to arrive at your place on 9/11. Have you received this package?
Faye C.
9/18/2023
No. We did not receive.
Katrina D.
9/18/2023
Ugh, it looks like the shipping has been updated via the tracking number and you should be receiving the order today at some point [9-18]. Please let me know if you do not receive it this evening. I would also love to hear your feedback on your experience once you actually do receive the item. I am sorry for the inconvenience this has caused you.
by: Michael08/01/2022
did not fit I had to splice in 14" of wire so it could reach the two tail lights
and this was the second one I purchased the first one did not have the correct connectors
Brooke M.
8/9/2022
This part is meant for Jeeps that have the factory tow package. I am wondering if that is the issue here. If your jeep doesnt have that then you would need part # 118425.
by: Gary H.06/03/2013
2000 Dodge Dakota
I recently recieved my tow hitch for a 2000 Dodge Dakota. The part arrived promptly and in excelent condition. I was very pleased with the quality of this hitch by Curt. It was very stout and had great welds. I haven't had a chance to mount the unit yet but the measurements look to be right on. etrailer.com has a new customer.
Gary H.
6/27/2014
Everything worked out great. Thanks for the check in. Have a great summer. Regards, Gary H.
by: henry m08/10/2017
2005 JeepGrand Cherokee
curt hitch i pefer to use because never have any problems always easy to install and get help when i need it however i ordered the wrong trailer harness for the jeep 2005 grand cherokee it does not have factory installed tow package can i exchange it please let me know what i have to do thank you henry m
Laura E.
8/19/2017
Henry, you can simply call us at 1-800-298-8924. We would love to help. For an explanation of our return policy, please see this helpful link:
Helpful Links
by: Barry B10/25/2017
2004JeepGrand Cherokee
The kit was extremely easy to install and fits like a fine glove. So easy in fact that the factory could not have done better looking job. Works great although I rarely use my trailer but I know when I do, I can rest assured that the wiring will not be a problem as it used to be.
Barry B.
10/25/2018
have since started driving a different vehicle. My jeep bit the dust. I liked the harness and it always worked fine but I didnt get to use it too long. I do remember how easy and well thought out the installation process was. I do keep a link to your website and have turned on others to it. Sometimes it was already too late but now they know its there. Ill definitely keep you guys in mind in the future
by: Michael09/19/2018
2005 Jeep Liberty
The product was everything that was advertised it arrived in perfect condition I guess I just misunderstood what I needed and inevitably ordered the wrong part my 05 Jeep Liberty did not come with a 7-way so I need a different harness to be able to hook up my trailer should have called customer service first
Mike L.
9/20/2018
If your Liberty didnt have the factory 7-way, I would recommend the # 118524 Tekonsha powered taillight converter.
by: Lisa05/28/2019
This product was what was recommended by your site as the proper wiring harness and it IS NOT compatible with my vehicle. Our family’s vacation has already been pushed back by 2 days dealing with this situation and we are still working on finding a local solution!
Mike L.
5/29/2019
This wiring harness is only compatible if your Freightliner Sprinter has the factory equipped 7-way trailer connector, as we state in our product fit guide. If your Sprinter does NOT have the factory 7-way, youd need part # 118650 instead.
Helpful Links
by: Jeffrey05/20/2019
2002 JeepGrand Cherokee
Fit just like advertised. They have excellent customer service. Videos and pictures were a great help.
by: Bobber Gibbs, Barrie, Ontario, Canada07/17/2021
etrailer received, filled, packaged and shipped my small order (wiring harness) within an hour, then turned it over to the US Post Office.... Within 2 days, it crossed the state line from Missouri into Illinois. A few days later, it was received in Chicago and should have arrived in Canada in short order.... Instead, tracking my order a week later revealed that it was resting comfortably in Miami Florida. A call to etrailer and Carol soon straightened things out. It eventually found its way to me and I am quite pleased with the service from etrailer. The Post Office? Well, you know..... Bobber.
by: John M09/18/2017
The T-wire harness was great, installed well and works fine.
The Seat covers are great as well, durable and easy to install, will consider rear seat covers if available?
The stabilizer bracket would not work with my platform rig, but looked of good quality and I will find a use for it.
by: Josh O10/10/2014
2006 Mercedes-Benz Sprinter
Bought this for a 2006 Dodge Sprinter didn't realize it would not work on a Sprinter with out towing package. Had to buy different kit and splice the wires in (not fun) make sure you have the right kit if you are working on a Sprinter. On a vehicle with the right harness it works great just plug in and go.
by: Gary02/20/2020
Dodge Durango
Thanks to etrailer's excellent customer service, I was FINALLY able to order the correct wiring harness for my '01 Dodge Durango. There are many variables due to several Durango models, and this was the correct one. Has worked flawlessly since installation.
by: Brook & Deb06/06/2023
perfect fit fast install!!
by: Jack L10/02/2019
Easy to install, hidden when not in use, doesn't reduce ground clearance and trouble free. Local hitch installer quoted me $350 and said it would take 3" off my clearance. I saved over $200 and got a better setup.
by: JAA235104/03/2022
It would have been very easy to install but my truck did not have the quick disconnect behind the bumper.
Jenny N.
4/14/2022
You mentioned that you were not able to find the connector and I wanted to ask if you were adding on the 4 flat or replacing it.
by: Jeremey03/24/2022
Super easy to install and worked right away, no additional fuses or lights necessary. Videos were easy to find on [online] and very easy to follow. Would recommend this to anybody. Mine did not come with the double sided tape, but I had some lying around so no worries.
by: Carter 07/01/2022
I've had this on my truck for a year to pull my little 5x8 utility trailer for work. It's worked every time so far and haven't had any issues with it. So far so good. Oh, and it only took about 20 minutes to install of you're into that kind of thing.
by: CHARLIE G.06/13/2017
2000 Dodge Dakota
I was in a hurry and I bought the wrong wiring harness. I have ordered the right wiring harness and it is on the way. My truck does not have the factory trailer connections for the wiring harness that I ordered.
by: DAN M.03/25/2017
2007 Dodge Dakota
didn't even install it .... my Dakota had no hook up ... had to hardwire a connector .... waste of $15 , not even worth my time returning it .... I did buy a hitch that I am using though ... should have bought a chevy
by: Ed01/22/2022
Wrong product .. reordered correct one .. said this was 4 pin connection, but requires vehicle to be equipped with 7 pin connection from factory. Guess you have to read the fine print
Jenny N.
1/24/2022
For a 2004 Dodge Dakota with a factory seven way this harness adds a 4 flat. For a 2004 Dodge Dakota that did not come with a factory harness part # 118323 would be a fit.
by: Linda05/29/2017
website was very helpful and easy to use. Told me exactly what to order and how to install, Items arrived and installed exactly like they said they would. Saved us $300 dollars and have exactly the same hitch we were quoted at several different trailer install places. Thank you etrailer!!!
by: Greg10/02/2017
2007 Jeep Liberty
I watched a video of theirs on Youtube which linked to the correct part and I bought what the video linked to, assuming it was the one shown in the video (without the factory 7-way). They sold me the one that uses the factory 7-way (which I don't have) and when I called asking to exchange it for the right one, they said it wasn't possible. They said they'd take it on refund, but are charging me for return shipping, and considering it's such a lightweight and cheap part to ship (and their website's mistake), I'm losing a significant portion of the money I spent on it.
25
161
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommendation for a Class V Trailer Hitch that Will Fit a 2007 Dodge Ram with Factory Trailer HitchWe do have several trailer hitches that are designed to fit beneath the factory trailer hitch on a 2007 Dodge Ram. You can use Curt Trailer Hitch # C15704 if you want a 2-1/2 inch trailer hitch receiver. Hitch # C15409 has a 2 inch receiver. The recommended ball mount for a 2-1/2 inch hitch is # RP45323, and you can use pin and clip # 37201065. For a ball you can use # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, if your truck has a tow package with a 7-Way...
view full answer... - Brake Controller Install Kit for a 2000 Dodge Durango with 4-WayYou will need to start with a 4-way (if you do not have one). For that you would want the # 118381. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
view full answer... - Will the Draw-Tite Hitch # 75210 fit a 2006 Dodge Sprinter with a Factory Step BumperThe Draw-Tite Class III 2 Inch Hitch, part # 75210, is for a 2006 Dodge Sprinter with a 140 inch or 158 inch wheelbase and either single or dual rear wheels. It will not fit the 118 inch wheelbase vehicle. To fit the Sprinter with the dual rear wheels the width between the frame rails will need to measure 35-1/4 inches. On the 2006 Dodge Sprinter, the Draw-Tite hitch # 75210 will fit if you have the factory bumper that is molded to match the design of the vehicle. It will not fit your...
view full answer... - Trailer Wiring Harness Recommendation for a 2005 Jeep LibertyIf your 2005 Jeep Liberty has a factory tow package, you could use either the Hopkins harness, # 42475, or the Tow Ready harness, # 118381. The vehicles with a tow package have a factory connector made to add a wiring harness. Both products will perform equally as well. But if your Liberty did not come with a tow package, you will need to use Tow Ready Custom Fit Vehicle Wiring, # 118524. This is a circuit protected powered converter which is required to protect the sensitive electrical...
view full answer... - Recommended Hitch and Wiring for 2004 Jeep Grand CherokeeThe Curt # C13900 is a multi-fit hitch that is designed to fit on a variety of vehicles, but it would require some modification and drilling to install. Instead, I recommend using the Curt # 13051, which is a confirmed fit on your 2004 Jeep Grand Cherokee and will install without any drilling or modifications. If you're going to be towing with this hitch and don't have the towing package, you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55369...
view full answer... - What is the Difference Between Max Carrying Capacity and Weight Distribution CapacityAbsolutely, I am here to help! The max carrying weight of a hitch is how much the hitch can pull if you were to just hook your trailer up to the hitch and not use a weight distribution system. The Gross Trailer Weight or GTW of this hitch is 5,000 lbs. and the Tongue Weight or TW of this hitch is 500 lbs. The GTW is how much weight the hitch can pull behind it and the tongue weight is the downward force that the tongue of the trailer applies to the hitch of the tow vehicle. So the hitch...
view full answer... - Adding a 4-Way Trailer Connector to a 2006 Dodge RamIf your 2006 Dodge Ram came with a factory installed 7-Way connector you have a couple of options. First, you could replace the 7-Way with a 4-Way using harness # 118381. It will just plug in line in place of the 7-Way. The other option is to use a 7- to 4-Way adapter, # PK12716. If the truck did not come with any trailer connector you can add one using a hardwire installation kit, # 119178KIT.
view full answer... - Trailer Wiring Harness Recommendation for a 2004 Jeep Grand Cherokee without Tow PackageSince you do not have the tow package I am assuming you do not have a factory trailer connector. In that case I would recommend you get a Curt T-Connector Custom Fit Vehicle Wiring # C55369. This is the recommended wiring harness for the 1999-2004 Jeep Grand Cherokees, I attached a review video and installation instructions for this product for you to check out also.
view full answer... - Recommended Trailer Hitch And Wiring For 2008 Jeep Grand CherokeeThe trailer hitch I recommend for your 2008 Grand Cherokee is the Curt Trailer Hitch # 13251. This is a Class lll hitch and it has a 2-inch receiver opening. I have attached a link to an installation video of this hitch on a 2008 Grand Cherokee you can check out. As you can see in the video, the receiver is below the bumper. The bumper on the vehicle in the video does not have a relief as you mentioned. If you plan on doing some towing you might be interested in etrailer ball mount kit...
view full answer... - Trailer Hitch and Wiring Recommendations for a 2007 Jeep Liberty 4x4You can certainly use the Curt Trailer Hitch # 13044, that you have referenced on your 2007 Jeep Liberty. I have included a link to the installation instructions for you to view along with the video that you have mentioned. In terms of wiring, there are a couple of options. If your Jeep did not come with a tow package, you will use wiring # 118524. If it did come with a tow package, use # 118381. Depending on what kind of trailer connector the trailer has, you may need to add an adapter...
view full answer... - Recommended Weight Distribution for a 2013 ForestRiver Work&Play 25UDT Toy Hauler w/2005 Dodge RamThanks for the information on your 2013 Work and Play Forest River. In my research of your Toy Hauler, I found that your gross weight capacity is around 10,000lbs. This lines up to your dry hitch weight of 1,138lbs, putting you in the loaded tongue weight ballpark of 1,138-1,500lbs. To choose the right weight distribution it will be based on loaded tongue weight which is typically between 10-15% of the trailer and anything in addition to that loaded behind the rear axle. A great weight...
view full answer... - Recommended Trailer Hitch To Tow 2 Horse Trailer with 2004 Dodge Ram TruckWith the trailer load you will be carrying, using the Curt Trailer Hitch Receiver, part # 13333, would put you near or slightly over the tongue weight capacity of the hitch, which is 600 lbs. If you were to use a weight distribution system when carrying your horse trailer you would be ok to use the Curt # 13333 Hitch. Tongue weight is calculated to be about 10 to 15 percent of the Gross Trailer Weight. I would recommend using the Curt Class V Trailer Hitch, part # C15409. This hitch will...
view full answer... - Will Draw-Tite Trailer Hitch # 75338 Fit a 2009 Jeep Grand Cherokee Rocky Mountain EditionThe Draw-Tite Trailer Hitch, # 75338, is designed to fit all models of the 2009 Jeep Grand Cherokee except for the SRT8 models. The hitch installs around the rear bumper beam, so the full size spare that is part of the Rock Mountain Edition should not be a factor. I have included a link to the installation instructions and a link to a video showing a typical installation for you. If you are planning on doing some towing, I recommend etrailer Ball Mount Kit, # 989900, which comes with 2...
view full answer... - Parts Needed to Install a 7-way, 6-Way and a 4-Way on a 2001 Dodge VanThe Tow Ready Custom Fit Vehicle Wiring # 118381 that your referenced once installed will give you a functioning 4-way at the rear of your 2001 Dodge Van. Next I would recommend you install a Adapter 4 Pole to 7 Pole # 37185. This will give you a 4-way and a 7-way. Finally, I would recommend you get a Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570. This will plug into the 7-way of the # 37185 when needed and give you a 6-way, a 5-way and a 4-way.
view full answer... - Troubleshooting Trailer Turn Signals that Both Flash when Either Turn Signal is ActivatedI recommend we start by testing the 4-Pole connector on the # 118381 harness. You can use a circuit tester, like # PTW2993, to test the pins on the connector for each function. This is easiest if you can have a buddy sit in the vehicle and signal the lights while you test for the functions at the connector. I have attached a video showing how to test a 4-Pole connector for you. If the connector doesn't test for the proper stop, turn, and taillight functions, then you will want to check...
view full answer... - How Do I Install a 5-way Flat Connector at the Back of my 2006 Jeep Commander to Tow my BoatIn order to have a 5 pin flat trailer connection you will first need to install the Tow Ready Custom Fit Vehicle Wiring, part # 118381, that you referenced. I attached installation instructions and a link to an installation video for this product below for you to check out also. The next thing you will need is an Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, part # 20036. This adapter will plug into the 4-way that you just installed with the # 118381, and then you can run the blue wire...
view full answer... - What is the Correct Trailer Wiring Harness with 4-Pole Trailer Connector for 2001 Dodge DurangoFor your 2001 Dodge Durango we offer a custom-fit wiring harness from Curt, part # C55334. Unlike universal-fit wiring kits that require cutting and splicing of wires, this plug-and-play harness from Curt simply plugs into the taillight wiring behind the two light assemblies on your Durango. I have included a link to the installation instructions for this harness. This harness uses a converter to match the wiring of your Durango and trailer that employs surface mount technology (SMT) for...
view full answer... - Class V Trailer Hitch Recommendation for a 2000 Dodge Ram 1500 with 8 Foot BedAccording to CURT, trailer hitch # C15300, will fit the following Dodge vehicles: 1967 - 1980 Dodge Full Size Pickup Pickup, with Standard or Step Bumper 1981 - 1993 Dodge Ram Pickup Pickup, with Standard or Step Bumper 1994 - 2001 Dodge Ram Pickup Pickup, 6 or 8 Foot Bed with Standard or Step Bumper 2002 - 2002 Dodge Ram Pickup 2500 and 3500 Series with 6 Foot Bed or 8 foot bed The recommended ball mount is # BWBMHD30010, and you can use hitch pin and clip # PC3. For a ball, use # A-90...
view full answer... - Recommended Hitch and Wiring for 2000 Dodge DurangoThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75081 you purchased is the one I would recommend. This is the only option that has a concealed cross tube which gives it a cleaner look and better clearance. However, since it sounds like you do not have factory trailer wiring you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118334 instead of the # 118381. The wiring harness you ordered is designed to fit vehicles that already have a factory 7-way. You...
view full answer... - Installing a Brake Controller and 7-Way on a 2007 Dodge Sprinter RVSince your 2007 RV on the Sprinter chassis already has a trailer connector but it does not match either trailer, using the 4 and 7 way installation kit # ETBC7 would be a good idea. This will also provide you with the accessories needed to install the P2 brake controller # 90885. If that green wire does go back to the trailer connector then you will not have to run the blue wire from the connector to the brake controller. You can test it by applying 12 volt power to the wire using a separate...
view full answer... - Will the Curt Class III 2 Inch Hitch # 13333 Fit a 2006 Dodge Ram 1500 SLT Big HornYes, the Curt Class III 2 Inch Hitch, part # 13333, will fit your 2006 Dodge Ram 1500 SLT Big Horn as long as you do not already have a factory installed hitch on your vehicle. This hitch will not fit on vehicles with a factory installed hitch. Some other items you may need to complete your towing setup are listed below. Draw-Tite Ball Mount, part # 2753 Pin And Clip, part # PC3 Tow Ready 2 Inch Hitch Ball, part # 19247, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19260 If your Dodge...
view full answer... - Recommendation for a Trailer Hitch that Bolts to Bumper Support on a 2009 Dodge Ram 1500You are correct, your 2009 Dodge Ram 1500 does have a bumper support at the back that attaches to each frame rail with a support in the center that rests under the step bumper so you can place a hitch ball. The Curt Trailer Hitch, # 13333, that you have referenced attaches to the bumper support and uses the ball hole as an attachment point also, so it is compatible with your truck. The hitch can be used with weight distribution. I have included a link to the installation details for the...
view full answer... - Trailer Hitch, Ball Mount, Ball, and Trailer Wiring Recommendations for a 2008 Dodge Ram V6For your 2008 Dodge Ram, the Curt Trailer Hitch, # 13333, that you have referenced would be a good choice. This hitch mounts to the bumper support beam and the bumper. It has a gross trailer weight capacity of 6,000 pounds and a tongue weight capacity of 600 pounds. I have included a link to the installation instructions for reference. To complete your towing set up, the recommended ball mount is # 2753 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2...
view full answer... - How To Carry Four Kayaks on a 2008 Chrysler PacificaIf you have the factory roof rack on your 2008 Chrysler Pacifica then yes, we do have a system for you that will allow you to carry four kayaks. In order to do so you will need to place them on the roof with a roof mounted kayak carrier. I recommend the, Rhino-Rack Nautic Stack Kayak Carrier w/ Tie-Downs part # RRS520 because it is currently the most cost effective option. In addition to the above you will also need the Rhino-Rack Cam-Buckle Cinch Strap and Anchor Kit part # RRRBAS-RTD55P-RTD45P...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bryan
7/18/2023
A year out still 5 stars. Its common on these 4 pin connectors to have the plastic rub off next to the single exposed pin, this is no different. Still functional and stays connected throughout use.