bing tracking image
  1. Weight Distribution Hitch
  2. CURT
  3. 1100 lbs
  4. 1200 lbs
  5. 1300 lbs
  6. Fits 2 Inch Hitch
Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW

Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW

Item # C17057
Retail:$501.95
Our Price: $331.30
You Save: $170.65
Weight Distribution Hitch
This item qualifies for Free Shipping
Shipping Weight: 84 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full weight distribution hitch installation instructions. Great price Hideout Travel Trailer weight distribution hitch and expert service. Keystone Hideout Travel Trailer, 2018 weight distribution hitch by CURT are available from etrailer.com. For expert service call 1-800-940-8924 to order your Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW part number C17057, or order online at etrailer.com.
  • All Info
  • Reviews (753)
  • Q & A (0)
  • Photos

CURT Weight Distribution Hitch - C17057

  • 1100 lbs
  • 1200 lbs
  • 1300 lbs
  • Fits 2 Inch Hitch
  • WD Only
  • CURT
  • Electric Brake Compatible
  • Surge Brake Compatible
  • No Sway

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Round spring bars are constructed of solid, forged steel for strength and durability
  • Adjustable spring bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Grease zerks in the head assembly make for simple maintenance
  • Powder coated steel resists corrosion
  • Snap-up lever eases hookup by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Tongue weight: 1,000 lbs - 1,400 lbs
  • Maximum gross towing weight: 14,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Maximum rise: 6"
  • Maximum drop: 2-1/2"
  • 1-Year limited warranty


Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Lift Bar
  • Hitch Pin and Clip
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Forged Steel Spring Bars

The round spring bars are made from forged steel, giving them a distinct advantage over typical cast steel bars. Forging is a process where thermal and mechanical energy are applied to the steel, resulting in a finished product that is more resilient to impacts and is stronger in terms of shear strength. Simply put, these spring bars do a superior job of helping to hold your trailer in line because of their added strength and durability.


Built-In Grease Zerks

Built-in grease zerk on the Curt weight distribution system head assembly

The system's head features 2 built-in grease zerks so that you can easily lubricate the spring bars without having to remove them from the head assembly. The grease zerks are located on each of the shafts that encase the spring bars. Simply use a grease gun (sold separately) to inject grease into each of the zerks.



17057 Curt MV Round Bar Weight Distribution Hitch

Alternate 17007

Installation Details C17057 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW - C17057

Average Customer Rating:  4.6 out of 5 stars   (753 Customer Reviews)

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.

by:

Box was destroyed but parts were still in good condition with no scratches. Kind of impressive!



by:

I received the beat up but we'll taped packed with all the parts included.

I bought a new travel trailer recently. This weight distribution hitch restored my tow vehicle front axle weight to it's original unhitched weight and also to it's unhitched front axle wheel well height measurement. I also was able to load 300lbs of cargo to the front of the travel trailer and only measured a 1/2 inch of increase to the front axle wheel well height.



by:

Tongue weight of old trailer was 350 lbs. new trailer loaded up was 1100 lbs. Bought a new distribution hitch with 1400 lbs. rating to be sure it was adequate. Easy to fallow instructions for first time setup. No problems, works great.



by:

I have been using this on my 14000 lb dump trailer for a year now and have been very happy with it.



by:

I've waited to write his review until I could comment on both etrailer's service and the hitch's performance. First the service: I couldn't believe how quickly this 100 lb. box arrived--two days! Everything was intact and nothing was missing. The customer support of these folks is just incredible. Their prices were as low as I found anywhere, and with their quality service I bought everything I needed here.

Now the hitch. I bought the Curt C17057 WD hitch which has 1400# round bars, plus a pair of Husky friction sway bars for my 25 foot Airstream towed with a 2013 F-150 CrewCab. It's a really nice hitch/TT/TV combination. It controls sway really well, is virtually noise free and transfers weight appropriately, plus isn't nearly as heavy as the ProPride/Hensley hitches. I selected the Curt, in part, because it has grease zerks on the head, while some other candidates didn't. I couldn't be more satisfied!

Biplaner

3/12/2017

One year later, the Curt weight distribution hitch is performing perfectly.It does a good job of transferring weight to the tow vehicle, is quiet and was relatively easy to dial in exactly for my vehicle trailer combination.I coupled it with two Husky anti-sway friction bars, although I have only installed one of them because that has proven enough for my 25 foot trailer. An Eaz-Lift Husky anti-sway bar combination was suggested for me by AndyThomson of CanAm RV, but I substituted the Curt because I liked the greasezerks on the Curt. The Curt is a really well-made unit. Id buy it again,as well as the Huskys, which Ive found to be quiet and effective.



by:

Staff was helpful in helping me select product and accessories I needed for my Installation. My trailer has a tool box where the load hangers needed to be. A different mount solved the problem. Both etrailer and load equalizer get 5 stars. I’m on their mailing list and they carry an extensive line of products, many that I was totally unaware of. This opens new possibilities for future purchases.

I use my truck to tow a 14,000 GVWR trailer and needed an equalizer hitch for towing heavy loads. I pulled the trailer heavily loaded for over 2000 miles while bucking 20 to 30 mph headwinds and crosswinds. It tracked like it was on rails and strong wind gusts were hardly noticeable.

etrailer also has great articles regarding towing and other products they carry.

Richard M.

2/13/2019

Have used the hitch quite a bit in the past year with some pretty heavy loads. It has performed flawlessly and I couldn’t be happier. Would purchase this hitch again.



by:

We haul horses all around the country. Our truck has a slide in camper in the bed which requires us to use a 48" extension and w weight distribution system. The Curt system was east to install, has better tolerances than others we have used. Excellent value, we would buy it again without hesitation



by:

Fast Service at a great price. Box arrived is great shape.
Heavy duty parts for sure, almost 90 lbs.
Did not install it yet, still building shelving in the new trailer so we have not got the final load in it to adjust the spring bars. Will get back when we get the trailer loaded.

Frank R.

8/24/2016

It has been a Year since putting this hitch in service, all is working perfectly. It did take an hour to set it up properly the first time for the height of my truck. You have the height and the tilt to get the spring bars the proper tension. All is good. Great Product at a great price.



by:

For the amount of money these are, I had to use shims to keep the ball portion from wobbling in the drop down side of the hitch very disappointed and annoying every time I have to slide the ball around



by:

It is easy to use and built well. One issue though when I originally set it up I tightened the saddle pieces to the torque recommended on the instructions. The threads started to strip. I fixed it with nuts and have used it since. I did call your company to make sure I did it right (the instructions were a little confusing on that part to me anyway). The lady I spoke to said I got it right and I did ask for a new part but decided to use it anyway with the intent to call back. This really was a little issue other then that for the price it was a great setup.

Craig

7/18/2021

No problems with it. I have at least 10k miles towed with it.



by:

Very happy with the price and product



by:

It works well. Your videos were a big help on initial installation. I also had to put a sway bar on my camper. If I were to do it over again I would have gotten the weight distribution system that includes the sway bar functionality. I discovered that system after I purchased the the weight distribution hitch. Overall the weight distribution system works very well. If you don’t need a sway bar, I highly recommend it.



by:

Great hitch for a great price very easy to hook up and use no need to go out and buy one of those more expensive ones when this one does the same thing for less money and works great have no problem pulling a 40ft trailer with it



by:

Best hitch I've ever owned! I previously bought and used extensively a Curt 5th wheel hitch which was perfect. Both have been great performers...I tow without hitch problems or worries.



by:

Purchased a weight distribution kit and it was shipped and delivered within a couple days. Customer Service was excellent and their products are of good quality. I really like their website as they carry a lot of useful products. I have and will continue to recommend etrailer.



by:

Everything is as described. Fast delivery and packaged well.Will use etrailer again. Thanks

Patrick

3/31/2019

Still very happy with my Curt Weight Dist bars hitch system. After a year of commercial use hauling Travel trailers and 5th wheel trailers,I am extremely happy with the performance, lack of extreme wear and functionality of the system in general. The bars have withstood some heavy use without showing much sign of metal wear or fatigue on the high wear points where they snap up into the mounting slots. Locking spring system for the bars are still tight,and chain brackets show little wear along with being extremely simple to install on a variety of different trailer models. Very happy with all my Etrailer products and their fast delivery and helpful communication through all my purchases.



by:

I missed the fact that this doesn't come with a hitch ball. It's obvious now looking at the listing with that in mind - and they aren't that hard to come by locally, but I'm lucky that I'm not too far from civilization right now!

So be sure to get a hitch ball, too!

Other than that, easy to assemble and works fine, just like the other one of these that I previously bought (that did come with a hitch ball...weird!)



by:

This seems to be a nice hitch system. Appears well made. Doesn’t seem junky. It’s heavy enough to kill a guy (literally). I’m not really well rehearsed in different systems but this works quite well for what I use it for (10k equipment trailer). It went together easy (you will need massive wrenches/ratchet/sockets to snug everything up, 1 1/2”+) but handles my trailer well. I’d recommend it for the price.



by:

I was a little worried about setting up my first weight distribution hitch, but the instructions were clear and useful. I did have to give it a couple of tried to get the height right, but I worked out well. Would definitely recommend. And free shipping?!?!?! Sheesh, this thing is heavy. I'll definitely order from etrailer again,



by:

I bought this to use on my Chevy 2500 HD for towing a 11,000 lbs. travel trailer with a 1300 lbs. tongue weight (dry weights). You always want to buy one rated a little higher than what you should need. I used it once so far, towing the trailer roughly 200 miles. It works perfectly keeping the trailer and truck level, just as it should. I found it very easy to assemble and use, with very clear instructions. (Hint: read completely through the instructions before you begin assembly. Bolts will not be tightened until later to allow for adjustments).



by:

Purchasing this product from e-trailer was very professional and pleasant. The product was shipped out in a very timely manner at a very minimal expense and arrived at my door as stated it would. The price was unbeatable for the product and is a very good quality weight distribution hitch. All parts were there with instructions how to install. I would recommend anyone looking for trailer parts to go to e-trailer for their next purchase.



by:

The Curt weight distribution system with round drop down spring bar worked to solve trailer frame clearance issue I had with old style sprig bar.



by:

Fair price works well my 13.5 k trailer doesn't sag at all might want to consider a stabilizer/ sway control I notice on a windy highway I get alittle drift my trailer is 39 feet long wich may be a factor too



by:

Very pleased with the order. The weight distribution package a bit for wear.
I realize the weight is a factor, which contributes to the slight marring and scratching of parts, totally acceptable. The installation instructions were mutilated. Thats ok by me as I already know the product. Maybe placing it between 2 pieces of cardboard would help.
Happy trails



by:

Since we bought a new travel trailer that weighs twice as much as our old one, it occurred to me that our old weight distribution hitch might be too light. I ordered this 14,000 lb rated hitch and it truly is stout. It arrived in a couple of days, securely packed with great instructions on its use. This hitch is similar in design to our old one, except that its much heavier steel and this hitch has a height adjustment for different height trucks/trailers. The price was awesome. I really couldn't be happier.


25
752
Show More Reviews

See what our Experts say about this CURT Weight Distribution Hitch

  • Frame Width Size for 14K Curt MV Weight Distribution System
    The Curt MV Weight Distribution System part # C17057 will only fit trailer frames up to 2-3/4" wide but you can still use this system if you swap out the clamp on brackets for bolt-on brackets, the Chain Hangers for Curt Weight Distribution Systems part # C17005.
    view full answer...
  • Can Curt Weight Distribution Brackets be Used with Equal-I-Zer Weight Distribution Systems
    The Curt weight distribution brackets # C17208 are chain hanging brackets like in system # C17057. The Equal-I-zer systems do not use chains. So if additional brackets are needed you would need to use the Equal-I-zer brackets # EQ95-01-5600. If you are talking about the similar bracket set # C17508 then I cannot say that they and the Equal-I-Zer spring bars are compatible because they are not tested together making compatibility and capacity unknown. The other issue is that on the Curt...
    view full answer...
  • Weight Distribution System and Pole-Tongue Adapter Recommendation for 9,500 lb Boat Trailer
    For your application I recommend going with the Curt MV Weight Distribution (WD) # C17057 instead of the Curt # 17302 because the part you mentioned is only rated for up to 1,000 lbs tongue weight while the MV I recommended is rated for 1,000 lbs - 1,400 lbs tongue weight. Since you take into account the loaded tongue weight of the trailer with the weight of any cargo behind the rear axle of your Chevy Silverado this would be a much more safe option. In my experience boat trailers tend...
    view full answer...
    Image 1 for Image 2 for
  • Rear End of 2011 Ford F-150 Still Sags Even with Weight Distribution
    The problem that you are experiencing is a common issue with 1/2 ton trucks like your 2011 Ford F-150. The rear suspension on 1/2 ton trucks will still allow some sag even when using weight distribution. While making some adjustments to the set up of the weight distribution system might help ultimately you will likely need some rear helper springs to eliminate the sag. The helper springs don't have to be air bags. You could use Timbren Rear Suspension Enhancement System Item # TFR1504D...
    view full answer...
  • Replacement Spring Bar Retainers For Curt Weight Distribution Hitch # C17057
    The Curt Spring Bar Retainer Package # 17109 is what you need for the Curt MV Weight Distribution System # C17057. The new retainers are held in place using screws rather than pins.
    view full answer...
  • Weight Distribution Setup for Trailer With Pole Tongue and Heavier Tongue Weight
    We can only recommend Reese weight distribution systems for use with their pole tongue adapters, and based on the weight range of the # C17057 and the picture you sent in you'd want the higher rated pole tongue adapter part # RP58393 which is rated for up 1,400 lbs tongue weight. Then for a weight distribution system you'd want the # RP66131 which has a tongue weight range of 800 to 1,500 lbs. For a hitch ball you'd want the part # C40030 and for a shank part # RP63971 and you'd be set. Curt...
    view full answer...
    Image 1 for
  • What is the Distance Between the Hitch Pin and the Ball Mount of the Curt MV # C17057?
    The distance between the center of the pinhole and the center of the ball mount of the Curt MV Weight Distribution System # C17057 is a minimum 11-1/2 and a maximum of 13 inches. This is because this part can move slightly due to the tilt range of the system. If you need a ball to go along with the MV, you will need a hitch ball that has a 1-1/4 inch diameter shank. I went ahead and attached our product page that has all of the balls we carry that have a diameter of that measurement.
    view full answer...
  • Will Curt Weight Distribution Hitch # C17057 Fit 2 inch Hitch of 2013 Ford F-150
    The Curt weight distribution system part # C17057 that you referenced is designed to fit a 2 inch trailer hitch like what you have at the rear of your 2013 Ford F-150 5-1/2 foot bed. That doesn't necessarily mean your vehicle is going to safely be able to tow a trailer with that much weight though. You'll need to check your owners manual or with a Ford dealer to find out what your towing capacities are.
    view full answer...
  • What is the Length of the Spring Bars on Curt MV Weight Distribution System
    The length of the spring bars on the Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW # C17057 is 30-5/8 inches. These are the same bars, # C17074. We do not have this weight distribution system available without the shank.
    view full answer...
  • Curt Weight Distribution System Recommendation for 2005 Chevy Colorado Towing Enclosed Trailer
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The Curt part # C17057 that you referenced...
    view full answer...
  • Recommended Short Arm Weight Distribution Hitch for Trailer with 1400-lbs of Tongue Weight
    I have a solution for you, but the Curt MV # C17057 that you've currently got won't accept the new components you're wanting to turn your system into a short arm weight distribution hitch. For this reason, you'll need to get a completely new weight distribution hitch. The shortest weight distribution system we have is the Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422, which has 28" long arms and is similarly rated to your # C17057....
    view full answer...
  • Best Weight Distribution System for C-Channel Trailer Frames
    The Curt MV Weight Distribution System part # C17057 is not ideal for c-channel trailer frames. You could still use this system on your trailer but you would want to weld steel places on the frame rails where the frame brackets of the Curt MV sit. A better option for you would be to use a system that clamps around both sides of the frame like the Equal-i-zer Weight Distribution System part # EQ37140ET. The Equal-i-zer system works with trailers that have a total tongue weight (TTW) between...
    view full answer...
  • Comparing the Curt MV # C17057 and # C17063 WD Systems
    The Curt MV # C17057 system and the Curt MV # C17063 system that you referenced are actually the same WD system. The only difference is that the part # C17063 comes with a 2-5/16" hitch ball and a friction sway control whereas the part # C17057 doesn't come with either option. I recommend going with part # C17063 because you will need a hitch ball anyways and the sway control will help to reduce sway that you would experience from wind and passing vehicles. Please note that the sway control...
    view full answer...
  • How To Determine Which Weight Distribution System Works For A 2006 Ford F-350
    In order to determine the correct weight distribution system for your 2006 Ford F-350, you will need to measure the total tongue weight of your setup. To calculate this, you'll need to get the tongue weight of the trailer, loaded and ready to go, and add that to the weight of anything behind the rear axle of the tow vehicle. You can use a tongue weight scale, like the etrailer Tongue Weight Scale for Campers and Utility Trailers # e99044, which has a maximum weight capacity of 2,000-lbs. If...
    view full answer...
  • Curt MV Weight Distribution Hitch for 10,000 lb GVWR Trailer
    For your trailer, which has a GVWR of nearly 10,000 lbs and a 950 lb dry tongue weight, the Curt MV Weight Distribution System # C17051 you mentioned is well under the capacity so it would not be a good option. It is for total tongue weights up to 800 lbs so won't ride stiff, it simply won't give you any benefit at all, but we do have the right system for you. What you need instead is the Curt MV Weight Distribution System # C17057. This system is going to be perfect for your 10,000 lb...
    view full answer...
  • Confirmation of Proper Wheel Well Height for Older Pro Series Weight Distribution System
    According to the installation instructions for the Pro Series 49902, once the weight distribution system is installed and properly set up, the front wheel well or fender height should be equal or less than what it was before the trailer was hitched up and the weight distribution system spring bars were hooked up. Since your 'after' wheel well or fender height was 1/8 of an inch less than what it was before and you've only settled 3/4 of an inch at the rear fender, I'd say you've got it...
    view full answer...
    Image 1 for
  • Recommended Sway Control/Weight Distribution for Trailer With 1500-2000 lb Tongue Weight
    The best way to proceed is to definitively identify the tongue weight of the trailer when it's loaded as it typically would be when you tow. I'll link to an article that explains a few ways to do this, but the easiest method is to use a tongue weight/payload scale like the etrailer, part # e99044. I attached a video and an article to help you with this. Equal-i-zer weight distribution hitches are what I most often recommend, because of how well they're constructed and how amazingly well...
    view full answer...
  • Weight Distribution Systems for Travel Trailers with Nissan Armada
    You are correct that weigh distribution systems can be used to help distribute a trailer's tongue weight across the tow vehicle to let the trailer sit more level and improve braking and handling. Your vehicle might have an increased tongue weight capacity listed by the manufacturer for when a weight distribution system is installed, but a weight distribution system won't inherently increase the tongue weight capacity of your vehicle. With that being said, the Nissan Armada you are looking...
    view full answer...
  • Parts Needed to Tow and Use Camper For 2019 Ram 3500 Mega Cab Short Bed With Factory Hitch
    Okay, so there's a lot to get to here, starting with the fact that since you need an extension, you will also need to add a TorkLift hitch and weight distribution system. The reason for that is, standard extenders don't have the capacity needed for you to tow, but you can do this if you add the TorkLift hitch and extenders. The only thing I can't tell you is the length you need as that's something you'll have to measure for. But there are a variety of lengths available. For your 2019 Ram...
    view full answer...
  • Weight Distribution Recommendation for 6700 lb Trailer
    A fully loaded trailer weighing 6700 lbs would have a tongue weight that ranges between 600-1000 lbs, so you'd want to choose a system that's rated to cover that possible range. A typical chain-suspended unit like the Curt # C17057 MV weight distribution system would work fine for a utility trailer that's non enclosed, but if it's an enclosed cargo trailer or a travel trailer, you'll really want to do yourself a favor and choose a system with an integrated sway control component. Long...
    view full answer...
  • Tongue Weight Capacity of Curt # C17057 Round Bar Weight Distribution System
    The spring bars used in weight distribution systems will work over a range of tongue weights. The Curt # C17057 round bar weight distribution system has a maximum capacity of 14,000 gross trailer weight/1400 lbs tongue weight. That's the maximum, but the system is effective on trailers with tongue weights ranging from 1000 to 1400 lbs. In order to choose the correct system, you'll need to find the fully loaded and ready to tow tongue weight of your trailer. You'll also need to include...
    view full answer...
  • Curt MV Weight Distribution Hitch for 600 lb Tongue Weight
    There is a Curt MV weight distribution hitch for a 600 lb tongue weight, but the part # C17057 is rated far too high so it will result in a very stiff ride. So instead, for your 600 lb tongue weight the correct part is the Curt MV Weight Distribution System # C17051. This is the correctly rated system for that much tongue weight, and only requires you get a hitch ball, depending on the size of your trailer coupler. You will need either 2" Hitch Ball # A-90 or 2-5/16" Hitch Ball # # C40030. The...
    view full answer...
  • Recommended Weight distribution for 10K equipment trailer
    When it comes to installing a weight distribution system on you 10,000 pound equipment trailer I would recommend using The Curt MV Weight Distribution System - Round Bar - 14,000 pounds GTW, 1,400 pounds TW # C17057. When using a weight distribution system you will get the best ride when the trailers tongue weight is as close as possible to rated tongue weight limit of the distribution system. If you go way over or way under the recommend tongue weight that would cause more sway and could...
    view full answer...
  • Recommended 2 Inch Ball for Curt 1,400 Pound Weight Distribution System
    The Curt weight distribution system # C17057 includes a bushing to use a ball with a 1 inch shank. The bushing reduces the ball hole diameter down to a 1 inch opening for ball # 40038. You don't have to use the bushing though. For a 2 inch ball that does have a 1-1/4 inch shank I recommend # A-90. I have linked videos for both balls for you. Please note that the A-90 2 inch ball has a maximum capacity of 10,000 pounds gross trailer weight. And ball 40038 has a 12,000 pound capacity. So...
    view full answer...


< Previous



Do you have a question about this Weight Distribution Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.