Difficulty Adjusting Nev-R-Adjust Trailer Brakes  

A 235/75R15 size tire will mount to a 15 inch wheel that features a width range of 6 to 8.50 inches. With this in mind, the Dexstar Steel Mini Mod Trailer Wheel #AM20545 that you referenced should work nicely with your off-road tires, as it…

I attached a picture that I took from the instructions that shows where the 2x2 crossmember attaches on the Timbren Silent Ride Suspension for Single Axle Trailers #TSR3500S05.

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

The 3500-lb Timbren axle-less suspension kits #ASR3500S06 (regular tires) and #ASR35HDS01 (off-road tires) differ in that the kit for wider off-road tires provides a 2-inch greater distance from the mounting point on the trailer frame to the hub…

We do offer 60-inch replacement trailer axles from Dexter and both can be seen on the link provided. Note that both of these are rated for 2000-lbs. The 5-on-5-1/2-inch hub you referenced, part #84555UC1, is intended for 3500-lb axles. The most…

I went out to the warehouse to measure the outside diameter of the center of the hub #84546UC3. I used a set of digital dial calipers to take the measurement and came up with 2.6 inches in diameter at the widest point. The pilot hole on your trailer…

After installing replacement brakes such as the Dexter Nev-R-Adjust Electric Trailer Brake Kit, #23-468-469, proper adjustment is needed for that initial setting. If your brakes are engaging but not enough to apply ample friction for stopping then…

Is it possible that the drum is slightly smaller than the one on the other side? This does not seem likely but it might be worth measuring them on the insides to see. Adjusting self adjusting brakes is actually a little more difficult than you might…

I attached a picture that has all of the dimensions for the Timbren Heavy-Duty Axle-Less Trailer Suspension #ASR2KHDS03 listed.

I attached a diagram that has all of the relevant dimensions of the #ASR2KHDS03 that you referenced. From the hub face to the trailer frame this setup will give you 8-1/2 inches of clearance for your trailer wheels and tires. (see dimension K on…

We don't carry the exact same assembly as what you have but we have one that will work. The part #AKEBRK-7R-SA is a 5,200 lb self-adjusting brake assembly that will match right up and work well for you. For the matching other side you would want…

Dexter makes 5,200 lb trailer brake assemblies that are self adjusting like part #23-458-459 as well as ones that are manual adjust like part #23-105-106 so it could go either way. I attached a picture that points out what to look for on your…