Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Trailer hub fits 2,500 idler axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (20 Customer Reviews)
Trailer hub fits 2,500 idler axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and lug nuts included.This replaced the beat-up hub assembly on my livestock trailer perfectly. This assembly was a breath of fresh air after scouring the internet for any hubs using 3/4" outer bearings and 1.25" inner bearings. The assembly of this was very simple and made with nice tight tolerances. I used a new spacer washer and reused the hub nut capped with a 3/4" hub buddy instead of the dust cap. This setup handled well since I drove an hour and a half on the highway right after installation without needing to stop and the hub was cool to the touch when I arrived at my destination.
First I would like to say that in my opinion the replacement hub is much better than the original because it is made from a solid casting, as opposed the the 3 piece original. Everything was machined well and fit exactly as expected. Not only would I recommend this product but I have to say that just as important as the product is the customer service. Your representative Kate took the time to help me with gathering the information we needed so that she could then search to locate the assembly I needed. She was confident that it would be the correct one and she was right.
Although I haven't really towed yet. The ease of the installation was great
Fantastic service. I purchased a pair of trailer hubs, and was contacted regarding potentially getting ones that were not only in stock but also cheaper. We confirmed the hub requirements against the existing spindle and found that the originals were the ones I required, but it was great to have said confirmation.
The only miss was the hub nut caps that came with the kit are too shallow for my application, but I have an oddball spindle and my old ones worked so no big deal.
Received 3 races and only one bearing with this hub and the seal was damaged in shipping as there was no packaging in the box with the parts.
They had a hard to find hub for an old boat trailer axle. The seal was missing from the package, they wasted no time getting me what I needed.
I would buy from them again!
Awesome fit great !!!!!
My parts were exactly what I needed. 5 star. Thanks
Lorna was great. She helped me figure out the size that I needed to convert an old trailer hubs with new hubs. Thank you it fit it everything was perfect.
Joshua K. Helped me source an oddball hub that was "just to difficult" for others. Excellent Service.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
10/16/2023
Oh no! I will have our Customer Service team reach out to you.