bing tracking image

Optronics Miro-Flex LED Trailer Tail Light Set Installation

content loading

Customers compare TLL28RK to these similar products




Products Featured in this Video





How to Install an Optronics Miro-Flex LED Trailer Tail Light Set


Today well be installing the LED Trailer Taillights for the left hand as well as the right hand, part numbers STL28RB, STL29RB or as a kit, part number TLL28RK. Now this is a replacement assembly with LED lights. Now to begin our installation, well need to remover the old taillight assembly. Here on the right hand side, well undo the two nuts holding the assembly on where we can then remove it from the trailer and using a small pick well undo the wires from the light assembly. We can now place the light assembly off to the side. Well take the new trailer light and after preparing the wires, well attach them together using the brown wire on the taillight assembly and connecting it to the brown wire with green strip and the green wire from our taillight assembly and connecting it to the green wire on the trailer.

Well need to strip the installation and well go ahead and crimp the butt connector connecting both ends. Now the white wire with the ring inaudible 00:01:25 is a ground. The previous taillight grounded through the nut that held the taillight in place, so with this taillight we will need to make a small hole using a self-tapping screw to create a ground. Now that weve done that, well take the two included carriage bolts and slide them into position on the taillight assembly. We can then pass them through the trailers mounting bracket and using the included washers and nuts well secure out taillight assembly to the trailer.

With that our right hand side taillight is on and we can move over to the left hand side. Now the left hand side installation will be identical with the exception of the license plate bracket. Well take the license plate bracket and place it on the taillight assembly before we slide the assembly into the mounting plate of the trailer. We can then use the washers and the nuts to secure this taillight into place. Well now go ahead and use our tester to show you the difference.

That completes our installation of the LED Trailer Taillight for both left hand side and the right hand side, part numbers STL28RB, STL29RB or as a kit, part number TLL28RK. .


Info for these parts were:

Employee Zack K
Video Edited:
Zack K
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.